Wireless Joint

Hi,

For the Orbi 5G (NBR750) there is a section under Mobile Broadband Settings that has a field for "TTL (Time-To-Live)". Can this be used to update the modems TTL to 65? I was able to make all of the other changes I needed to the modem by removing it and sending AT commands via putty.

Thanks ...

Adm1jtg wrote: Thu Aug 26, 2021 3:47 pm Well looing at your image I would ask.... Have you tried downloading and using firefox like it suggests?

Yes, that was the first thing I tried. I also tried with Chrome, Safari, and Edge. Nothing seems to be clickable. I am thinking maybe the manufacture disabled it via a firmware update.

Hi,

I have a RM500Q-AE that is in ECM mode. I am able to log into the webserver using the IP address however all of the menu options on the left navigation are disabled/grayed out. Does anyone know how I can enable the menus? There are options for WWAN Settings, NAT Settings, Firewall Settings ...

You can set the "APN Protocol" via AT commands to either IPv4, v6, or v4v6, but the router's firmware will probably overwrite it after a reboot. You could give the following a try.
https://wirelessjoint.com/viewtopic.php?p=20344#p20344
If it still doesn't work, then it likely your modem being ...

You can set the "APN Protocol" via AT commands to either IPv4, v6, or v4v6, but the router's firmware will probably overwrite it after a reboot. You could give the following a try.
https://wirelessjoint.com/viewtopic.php?p=20344#p20344
If it still doesn't work, then it likely your modem being ...

Didneywhorl wrote: Fri Aug 13, 2021 11:19 am Which service an plan?

I’m using it with T-Mobile Magenta Max plan.

I used it in the phone and it works fine with using usb tether. Now that I look at it I’m actually referring to the APN Protocol. When it’s set to IPv4 it works and IPv6 doesn’t work. Is there anyway to update those settings on the modem?

I have the RM500Q-AE modem installed in the WG1608. I am having an issue connecting a few of my devices with the router. I think I have narrowed it down to being an APN Protocol issue. When I connect an android phone to this router and create a new APN and use an APN Protocol of IPv4 everything ...