Wireless Joint

Careful, just yesterday I went over their 'NEW' (unlimited) cap of 75GB on the vzw side of things and its now slowed to a hault for the next 2 weeks until it renews. Still pissed off about there newest caps, is only reason I recently switched 3 lines to them. It works great and just like actual ...

The RM502Q-AE should be just as capable I would assume. Did you try a visit to the tower to run the numbers? About the only difference I can think of is the antenna setups, which a trip to the tower would rule out. Last I looked I wasn't impressed with the numbers on your antennas so I wouldn't be ...

Further troubleshooting. Took my T-Mobile sim out of my phone and put it inside the modem enclosure. Running speedtest against my wifes t-mobile phone continue to show the same pattern.

RM502Q-AE results: AVG 330mbs
Note 20 Ultra: AVG 415mbs

I am having trouble understanding why this modem is ...

His signal was shown in the 'servingcell' AT command response.

Visible
AT+QENG="servingcell"
+QENG: "servingcell","NOCONN","LTE","FDD",311,480,2173102,406,5230,13,3,3,8906,-79,-12,-50,11,0,-160,-

^^^ RSRP:-79, RSRQ: -12, RSSI: -50, SINR: 11

AT&T
AT+QENG="servingcell"
+QENG: "LTE","FDD",310 ...

Its not just about being de-prioritized it is also about server utilization. Sounds like at 1am there is low utilization and when you last tested there were many more people utilizing the server.

Also I have found different bands not only work faster and slower but also some are less utilized ...

Dr-BroadBand wrote: Thu Oct 07, 2021 10:46 am Would be helpful if we had all the number of your signal

What would be the best way to pull this information?

Signals look okay but was hoping it would show the CQI values but I forgot you have to run an AT command to first enable that. On another note, if you won't be using any 5G connections, I would switch the modem to run in 4G mode so its not searching for any 5G bands on any of the multiple antenna ...

WoW cool setup!! 8-)

If I had to guess the bottleneck is with The USB connection.

Would get with the boys at the The Wireless Haven Store and find a good router for that killer Modem you have.

Maybe something like this


https://thewirelesshaven.com/shop/routers/lte-routers/wg1608d-m-5g-ready ...

Are your 'per connection' results from a direct connection to the modems or are the results based on what you are seeing through speedify?

Yeah, the per results were from connecting the ethernet directly to the Raspberry Pi's and running speedtest from:
-Google's Speedtest
-Speedtest.net ...

Hello,

I am hoping someone will be able to assist me or troubleshoot the slow speeds on my RM502Q-AE modem. I am consistently getting slower speeds with the modem vs inserting the sim in an iPhone.

Short description of my setup, recently moved into an RV to travel full time.
2 Quectel RM502Q-AE ...

Since this modem does 7xca, is it even necessary to lock bands? Would I see any benefit from locking bands over allowing the modem to automatically carrier aggregate?

Also, what does command do?

After days of troubleshooting and trying the modem on different devices, I was able to get it working with Visible. Hopefully this can help anyone else experiencing a similar problem. Using a Linux computer I pushed all the AT commands posted above from the guide except for AT+QCFG="nwscanmode",3,1 ...

Ok thank you, I ran the command as you suggested. Do you have any other recommendations on how I can get this to work either with Rooter - OpenWRT or natively within Linux?

Hey everyone,

I really need some help setting up my RM502Q-AE. I currently have the modem on a USB enclosure and trying to set it up on Visible. When connecting to my linux machine, if I create a mobile connection with APN VSBLINTERNET it just keeps spinning. When I put in my Verizon SIM card and ...