Wireless Joint

Hello again guys, has been past a few months since I asked for your help. That has both the good and the bad side: I am responsible for the bad, because I wasnt active as desired, mainly because family duties. The good side means everything is running good with your advices, so thank you @bjames ...

Didneywhorl wrote: ↑Fri Jul 16, 2021 9:04 pm TTL may be something to try for sure, especially if they track hotspot usage. The standard value is usually 65, but yours may be different there.

May I request your help on this? What command should I use and how?
ty!

Hey Didney, and thanks again for your prompt reply!

What about been throttled?

Would you, in my situation, giving a try to set a TTL value?

I think your jumping from a crappy tower to a yood tower, back and forth. :? :? :? F***!!! Lucky for you the Quectel modems can lock to specific towers and radios on those towers. Perfect! In fact I asked about it in my prior reply to yours. Are you using your 4x4 mimo antenna? Or just the stock ...

Hi Didney! Thanks for been there, well, about your questions, let me learn each one of your terms as you may know I am totally new with all of this. Your SINR is WAY bad. Yes it´s sh**. Bad for me. Anyway to improve it? Are your antennas or antenna cables near a high voltage AC power source? Not ...

06-30 a) 16:00: 06-30 1600.jpg b) 18:30: 06-30 1830.jpg c) 22:30: 06-30 2230.jpg Today during the morning and until early afternoon I get pretty decent dl speeds through B7 mostly (a), but when the night was coming (b), it dropped down terribly using B7 too. Once again I decided to reboot to watch ...

Hey, the pictures didn't load at all, so I cant see the examples. Make sure you upload them instead of linking to them. See here: https://wirelessjoint.com/viewtopic.php?f=37&t=2156 You can just edit your post above instead of reposting, or you can repost if you like. Hey Didney, Editing my prior ...

Hey Bill and Didney, thanks for passing. Here I am updating about my internet status: finally I move forward with the antenna and installed it in a 6ft pole for testing purposes (I am planning to install it definitely in a 20ft pole, btw). We in Uruguay are too far away from getting US speeds ...

@Didneywhorl any advice on how to band locking and carrying aggregation for my modem? Tx once again!

Hi again Didney and thanks for passing. I am able to see the wifi SSID but only the 5Ghz, not the 2.4Ghz. I'll do what you recommend and let you know.

Hi again Didney! Well, your commands were close to totally succesfull in my case and now I have internet using both lan and wifi, to be honest through wifi I am seen the 5Ghz net but I am not been able to see the 2.4Ghz (how could I solve this?). So tyvm! About each one of your commands, here were ...

Didneywhorl wrote: ↑Fri Jun 18, 2021 9:39 am You only need to enter the APN: antel.lte

nothing else

The other items you list are tower specific.

Perfect Didney, I am now with your commands. I will reply about them in the next post

I would flash the router more than once, sometimes the oddest things happen with a firmware update. Some thing it's dumb, but I have zero issues when I flash my routers 3x in a row before setting up anything. Done! I would remove the SIM card while flashing though. Done! Then once you have a stable ...

I would flash the router more than once, sometimes the oddest things happen with a firmware update. Some thing it's dumb, but I have zero issues when I flash my routers 3x in a row before setting up anything. I would remove the SIM card while flashing though. Then once you have a stable fresh ...

I would first use the update the router to the latest firmware: http://www.aturnofthenut.com/upload/WG1608-16M-GO2021-06-06.zip I would also use the firmware recovery method to update the firmware. This always seem to work best for me. Hi bjames and thanks for your reply! Great! I would be updating ...

Hi guys, I just entered this world hoping that you will help me solve my problems. :o :? I recently moved from the city to a rural place with a very poor internet signal and decided to invest money trying to improve it. It was 4-5 months reading and searching the internet until I got to both ...

Welcome to the forum! Thanks! If your Asus has drivers for the modems, then yes. Otherwise you may need to try and find a "Goldenorb" or openWRT (with modemmanager added) firmware image and flash that to the router, OR buy a router that can use LTE gateway modem supporting firmware. Well, I did ...

Hi all and thanks for reading. First above all excuse my english as it is not my native language ( Im from Uruguay, the small country between Arg and Brazil). Having read a lot of posts and comments in the forum, let me tell you I am learning a lot more than any other place. I was really lucky to ...