Wireless Joint

Yes, SIM card shows “ready”
I’m using the adapter from the 3 pack kit that came with my WE826 being that it’ requires a different size adapter than the WE826.
So odd shows Ready but has a zero signal even when I drive over closer to tower keeping everything powered up in my pickup. The signal ...

I have the exact same issue. I have direct line of site to a Band 41 tower but cannot get any signal. Shows 0% signal strength. I currently get 50 down with my original setup which is WE826 and AD 1DP727L15 NF Antennas. I was just hoping this would simplify my setup. Could some of the settings need ...

Yes Sir. I did read that in the troubleshooting guide.
Great, I'm up and running now so I will start to familiarize myself with the different tabs and options with the router now.
I have an Orbi by Netgear Mesh home system so my plan was to plug via ethernet directly into the main router and one ...

So in step 6 of tutorial it talks about going to modem connection info
here is a screen shot of my dropdown in the configuration screen. As you can see its missing the Modem Connection Info Tab. That's where I'm lost. Thanks again

Thanks for the clarification... Learning Here

Also the Kernal Version of firmware is 4.14.54

So here we go, I installed the following Firmware on a WE826-T with a Sierra MC7455 Modem.
we826-GO2018-09-02 , The Tutorial I used was the thewirelesshavenIT "Configuring the router" one that I found here on Wireless Joint. I cannot seem to get any internet from router. When configuring, some of ...

I'm new here so Ill Apologize for the stupid question right now. Thanks for the tolerance.
I have a WE826-T with the Sierra MC7455 Modem. I'm a calyx supporter so I have a sprint aircard that has no external antenna ports and no usb tethering capability which is why I'm going the WE826 Route. Thank ...

JFlex,
What carrier are you using on your new 7565. I’m on Calyx and wondered if you know of anyone having luck using sprint with the 7565 on Calyx.
Thanks