Wireless Joint

I solved this issue on my router finally a few month ago and it was an issue of buffer bloat and overload due to MTU settings. By default the MTU setting on the router is set to 1500 and this is incorrect for the router and modem. I also set enable SQM with no speed Up/Down link shaping and this ...

Do you have IPv6 enabled? I recently did some testing with IPv6 and found some odd behavior that I would say was very similar to a state table filling up. e.g. new connections would fail, existing or established would continue to work, etc. I went back to IPv4 only and the mofi seems to be much ...

zaqrat wrote: Fri Oct 02, 2020 4:18 pm I'm not seeing any of those options... do I need to enable something?

Here's what I see:
bandlock.png

Thanks again!

you must be running a different firmware version?

Where can I download the ATT firmware, I'm not seeing it on the mofinetwork site... I'm also not seeing a multilock option. I have a MOFI4500-4GXeLTE-V2, are you on the same device?

Thanks!


If you look under the internal modem settings page, tab at the top for provider selection. On that page ...

I'm running 4.2.9std. Was still having issues with reconnect times and generic firmware. Moved to ATT firmware today and set band lock to 2,4,12. Not ideal as B2 is faster for me, and ATT keeps forcing B4, but so far I am not dropping.

So I've been troubleshooting a similar issue. I am advance band locked to B2 and B12, I use 2 bands so that carrier aggregation still works correctly. Everything has been great until about a week ago and now I am noticing the same full bars to 2 bars, loss of data connection, and then reconnect ...