Wireless Joint

I switched from an EP06 to an EM12 and although I'm not seeing much faster speeds, it has been pretty stable the last few days. No disconnects in about 3 days. I have mine in a USB with GL-1300 router.

The other commands that have helped me with Visible are
Use the exact "ROW_Generic_3GPP_XXXXXX" you get from the list command.

Trying to decide between an LBR20 and a GL-B1300 with a modem in an external enclosure.

I full-time RV and frequently need to lock different bands depending on where I am.

With the Voxel software, is band locking easier with the LBR20, or is everything still done via scripts and command line?

The WG1608-GO2021-07-31 firmware has been working fairly well for me, although I did lose the 5G Wifi Network the other day(the 2.4G wifi still worked). A reboot brought 5GWifi back.

I've been getting over 150Mbps on ATT the last 2 places I've been with an EM160(Estes Park, CO & Littleton, CO ...

Resurrecting this thread to see if anyone found a way to install Wireguard on ROOter?

I tried forcing the opkg instakk but that just bricked the router.

I like the modem status screens on ROOter but if there is something similar on OpenWRT snapshots I can try running those on my GL-X750.

Which band are you connecting to with T-Mobile? For me Band 4 & Band 66 have been the fastest on Tmobile.

Also, which modem comes with the Mofi Sim4?
Does it support carrier aggregation?

Can the fitmware be flashed in the router? (GL-X750) Trying to connect to Visible with EP06ALAR02A04M4G and think I need EP06ALAR02A07M4G

So a lot of phones are snitches and TTL settings won't hide your tethering.

EasyTether will hide it.

Thanks, this thread helped me get VIsible running on a GL-X750 with an EP06-A i just swapped in. There was whiskey involved, so I will need to break it again and re do it so I can take note of the steps I used. I think my Visible nano sim isn't working great with an adapter because some times the ...

I tried these commands on a GL-X750 router & EC25 modem but with stock firmware and it didn't work.

I had to use a manual connection with /dev/ttyUSB3.

Maybe, I'll install GoldenOrb on it today and try again.

These are the listed CA combos;

B2 + B2/B5/B12/B13/B29②;
B4 + B4/B5/B12/B13/B29②;

B7 + B5/B7/B12/B26;
B25 + B5/B12/B25/B26;
B30 + B5/B12/B29②;

B66 + B5/B12/B13/B29②/B66

Band 2 & 66 both say 10M down

Appreciate the calculations.

I'll get up early and do some more testing tomorrow morning.

Band 2 gives me the best connection and speeds where I am now. I can get band 66 but it seems to be less stable.

I get better speeds with a weboost vs without and even vs when I put the GL-X750 on the RV roof for a test.

I switched to the Taoglas TG.55.8113W internal antennas which seem a little ...

What kind of speed increase did you see upgrading to the EP06-A?

Where did you buy it from, I'm looking to do the same exact upgrade.

Currently using a GL-X750 with an EC25-AF and getting about 18Mbps max down with T-mobile.

Is it worth the upgrade to an EP06-A(or MC7455)? Would I potentially double my speed with CA?

Are there any recommended US vendors that have the EP06-A in stock?

I am also considering buying one of these ...