Hi all —
Anyone have A copy of the Quectel EMG 12 hardware spec sheet? I tried to download it from the website but they want, uh, a lot of information before they will release the PDF...
Thx
Search found 13 matches
- Wed Sep 23, 2020 11:50 am
- Forum: Misc Modem Cards and Dongles
- Topic: Quectel EMG-12 hardware spec sheet
- Replies: 0
- Views: 1431
- Wed Sep 23, 2020 11:47 am
- Forum: Misc Modem Cards and Dongles
- Topic: From MOFI4500 to Sierra 7565 = 2x down, 1/3 up
- Replies: 0
- Views: 1364
From MOFI4500 to Sierra 7565 = 2x down, 1/3 up
Hi all—
I upgraded my rig from the standard MOFO4500 Sim7, was getting about 45Mbps/15Mbps.
Now with the Sierra 7565 in a WG1608 I’m getting 90Mbps down (Carrier Aggregation!) but my upload dropped to about 5Mbps.
Same 2 yagis - not change to antenna setup.
Running GoldenOrb 06-10 firmware, 06 ...
I upgraded my rig from the standard MOFO4500 Sim7, was getting about 45Mbps/15Mbps.
Now with the Sierra 7565 in a WG1608 I’m getting 90Mbps down (Carrier Aggregation!) but my upload dropped to about 5Mbps.
Same 2 yagis - not change to antenna setup.
Running GoldenOrb 06-10 firmware, 06 ...
- Mon Sep 21, 2020 9:32 am
- Forum: General and Unclassified
- Topic: WG1608 with EM7565 & GoldenOrb WG1608-GO2020-06-10 = can't connect
- Replies: 18
- Views: 10264
Re: WG1608 with EM7565 & GoldenOrb WG1608-GO2020-06-10 = can't connect
OK thanks for the help y'all, turned out to be the SIM -- tried another line on our plan and whammy! no problem - connected and doubled the speed of the MOFI4500.
But upload speed dropped by about 2/3, from 15Mbps to 5Mbps on the EM7565. Any thoughts there?
But upload speed dropped by about 2/3, from 15Mbps to 5Mbps on the EM7565. Any thoughts there?
- Sun Sep 20, 2020 8:26 pm
- Forum: General and Unclassified
- Topic: WG1608 with EM7565 & GoldenOrb WG1608-GO2020-06-10 = can't connect
- Replies: 18
- Views: 10264
Re: WG1608 with EM7565 & GoldenOrb WG1608-GO2020-06-10 = can't connect
AT+CGDCONT?
+CGDCONT: 1,"IPV4V6","broadband","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
Seems like a lot of zeroes. Tried all the different APNs, they showed up here, but no luck.
+CGDCONT: 1,"IPV4V6","broadband","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0
Seems like a lot of zeroes. Tried all the different APNs, they showed up here, but no luck.
- Sun Sep 20, 2020 3:18 pm
- Forum: General and Unclassified
- Topic: WG1608 with EM7565 & GoldenOrb WG1608-GO2020-06-10 = can't connect
- Replies: 18
- Views: 10264
Re: WG1608 with EM7565 & GoldenOrb WG1608-GO2020-06-10 = can't connect
Thanks guys -- on ATT, tried out the 3 APNs, didn't know about the others! Noticed that my phone was using nxtgenphone though so I thought maybe that would do the trick. But no luck.
So on GoldenORB do I still need to install the QMI package? as per https://openwrt.org/docs/guide-user/network/wan ...
So on GoldenORB do I still need to install the QMI package? as per https://openwrt.org/docs/guide-user/network/wan ...
- Fri Sep 18, 2020 2:10 pm
- Forum: General and Unclassified
- Topic: WG1608 with EM7565 & GoldenOrb WG1608-GO2020-06-10 = can't connect
- Replies: 18
- Views: 10264
WG1608 with EM7565 & GoldenOrb WG1608-GO2020-06-10 = can't connect
Hi all -- thanks for the help thus far!
I've got a WG1608 here with a Sierra EM7565. Came with OpenWRT pre-installed, but was incompatible and modem tab didn't show up. Flashed to GoldenOrb WG1608-GO2020-06-14, found modem tab. Put in APN and other settings as per FAQs (thanks) and still no go ...
I've got a WG1608 here with a Sierra EM7565. Came with OpenWRT pre-installed, but was incompatible and modem tab didn't show up. Flashed to GoldenOrb WG1608-GO2020-06-14, found modem tab. Put in APN and other settings as per FAQs (thanks) and still no go ...
- Fri Sep 18, 2020 1:58 pm
- Forum: General and Unclassified
- Topic: New ZBT WG1608 5G-ready router + GoldenOrb firmware
- Replies: 219
- Views: 259963
Re: New ZBT WG1608 5G-ready router + GoldenOrb firmware
Any luck with this? I've also got WG1608 and can't get it to connect to EM7565 with either WG1608-GO2020-06-10 or 06-14
- Mon Aug 31, 2020 3:08 pm
- Forum: Questions and Support
- Topic: MOFI4500 4x4 Mimo
- Replies: 4
- Views: 13247
Re: MOFI4500 4x4 Mimo
Thanks for the real talk! I am wondering now what modems support 4x4 MIMO -- can't seem to find a vendor for CAT16 or CAT20. Any suggestions?
- Mon Aug 31, 2020 3:07 pm
- Forum: Questions and Support
- Topic: Newbie Setup Advice on cable
- Replies: 4
- Views: 5072
Re: Newbie Setup Advice on cable
Awesome thanks so much guys -- I went from 2MB/s down to 40MB/s down after arranging things this way.
- Mon Aug 31, 2020 3:05 pm
- Forum: Questions and Support
- Topic: Parabolic Grid antenna 1700-2700MHz
- Replies: 2
- Views: 3046
Parabolic Grid antenna 1700-2700MHz
Hi all -- Noticing a lot of cheaper parabolic grid antennas out there, all claim to be LTE but they only cover higher frequencies 1700-2700, at least according to the specs.
Anyone know how that would compare to this $250 parabolic from Bolton that covers 600-996, 1700-2200, and 3000-6500mhz ...
Anyone know how that would compare to this $250 parabolic from Bolton that covers 600-996, 1700-2200, and 3000-6500mhz ...
- Wed Aug 12, 2020 1:07 pm
- Forum: Misc Modem Cards and Dongles
- Topic: MOFI4500 4x4 Mimo setup?
- Replies: 1
- Views: 1795
MOFI4500 4x4 Mimo setup?
Hi all -- newbie here so apologies if this is well-trodden territory but --
I realize now that I don't need the wifi on the MOFI4500, and could probably use another pair of antennas out in my neck of the woods.
Is it possible to disable the wifi, replace the 2 front ports with SMA, and rewire to ...
I realize now that I don't need the wifi on the MOFI4500, and could probably use another pair of antennas out in my neck of the woods.
Is it possible to disable the wifi, replace the 2 front ports with SMA, and rewire to ...
- Tue Aug 11, 2020 12:54 pm
- Forum: Questions and Support
- Topic: MOFI4500 4x4 Mimo
- Replies: 4
- Views: 13247
MOFI4500 4x4 Mimo
Hi all -- newbie here and apologize if this is common knowledge BUT
Just got a MOFI4500-4GXeLTE-SIM7-COMBO 4G/LTE Router. Before it arrived, I felt like I saw a tutorial that explained how to 1) turn off MOFI4500 wifi and 2) turn the two wifi antenna spots into outdoor antenna receivers, in order ...
Just got a MOFI4500-4GXeLTE-SIM7-COMBO 4G/LTE Router. Before it arrived, I felt like I saw a tutorial that explained how to 1) turn off MOFI4500 wifi and 2) turn the two wifi antenna spots into outdoor antenna receivers, in order ...
- Tue Aug 11, 2020 12:41 pm
- Forum: Questions and Support
- Topic: Newbie Setup Advice on cable
- Replies: 4
- Views: 5072
Newbie Setup Advice on cable
Hi all-- thanks for all the info available here, has been helpful!!
Here's my setup:
ATT Unlimited, rural Indiana
MOFI4500-4GXeLTE-SIM7-COMBO
2 x Proxicast 9/11 dBi Ultra Broadband LPDA High Gain Fixed Mount Directional Antenna
2 x Wlaniot Low Loss N Male to SMA Male with Weatherproof Connectors ...
Here's my setup:
ATT Unlimited, rural Indiana
MOFI4500-4GXeLTE-SIM7-COMBO
2 x Proxicast 9/11 dBi Ultra Broadband LPDA High Gain Fixed Mount Directional Antenna
2 x Wlaniot Low Loss N Male to SMA Male with Weatherproof Connectors ...