Wireless Joint

I get the following:

It says the follow, i assume it's good since 1 usually means good?

AT+CFUN?
+CFUN: 1

Fixed the problem from yesterday but I'm having more problems with my 3926 leading to no internet, this time it's not because it's not reading the simcard (AT+CPIN? command says ready).

Here's my GSTATUS:

Current Time: 71140 Temperature: 36
Reset Counter: 1 Mode: ONLINE
System mode: LTE PS state ...

Something happened today that caused me to lose internet completely. I have checked the link, there is no work being done on towers near me, and I do have the newest firmware (assuming it is the one from late august).

Here is my current GSTATUS:
Current Time: 2745 Temperature: 34
Reset Counter: 1 ...

Just realized, it looks like I'm hitting a different tower now? The band is the same but the bw is 5Mhz instead of 10Mhz and the cell id is different.

Usually, the higher the router (or at least the antennas), the stronger the carrier signal and the lesser the interference. Likewise, placing the router in a different room can often result in substantial signal gains or losses. This also hints the need for external antennas.

As for Band 41, have ...

I have tried locking into band 41 again and have not had any success connecting. Any last steps I should try?
I've also recently raised the router as high as possible in my room and have noticed that the download speed doesn't increase much, but the upload can jump to as high as 17 mbps, which is ...

This is the cable i bought, I'm 99% sure it is the right one. https://www.amazon.com/gp/product/B071HJN1H9/ref=oh_aui_detailpage_o02_s01?ie=UTF8&psc=1
(I bought it on amazon cause i wanted to get it quicker)
Now both antennas get pretty much exactly the same signal.

I tried changing the bands ...

Sometimes I'll test the speed on the 3926 and it will be as low as 1.5 Mbps while at the same time my sprint phone will be 10 times higher.

At this rate I'm thinking of returning at least the wireless card and just buying a R850. I know i won't be able to return the 3926 since i had to replace the ...

Ok finally i got it to work after reinserting the sim a hundred times. I don't know what the issue was but I think I will just leave the router as is and not put the case on.

Speeds a little higher now (5.4 Mbps down) but still not even where the R850 was.

PCC RxM RSSI: -73 RSRP (dBm): -103
PCC ...

Ok so I replaced the wire, everything seemed to be working and I was getting internet access. I then proceeded close the case and now I don't get internet at all. I am not sure what happened, here is my GSTATUS:

Current Time: 165 Temperature: 40
Reset Counter: 1 Mode: ONLINE
System mode: LTE PS ...

Ok so I took it apart and I think i see what the problem is. One of the 4g pigtail cables is almost completely torn. I am not sure when this happened, is the the one i should buy to replace it? https://thewirelesshaven.com/shop/cables/pigtail- ... 3-pigtail/

Thanks for your reply. I am getting similar readings after swapping the antennas and removing the washer; the disparity is the same and the main band is getting lower readings.

I am not sure exactly what you mean about making sure the connector is "not twisted so that the metal part of it is not ...

Hello, I recently bought and set up my 3926 with a wireless sierra modem
(with pcsforpeople). My question is what I can do about my speeds, as I've
actually had much lower speeds on average now that before with my R850
(though higher uploads). I'm averaging about 5 Mbps down and 7 up,
previously I'd ...