Wireless Joint

Also is there any downside to me updating the firmware on my mr1100?

I’m on: 12.06.08.00
Available: 12.06.11.00

will this affect my changed IMEI and remove my band steering? Anything else beyond that?


It will but with dc unlocker you have unlimited imei edits with the same router once you ...

You'll want to use M and D/G, though the em20 is meant for 4 antennas, it should work.

There is no command to see each antennas signal strength. The command does exist (AT+QRSRP I think) but the EM20G does not support it, and Quectel has placed the device in development limbo for now. The Quectel ...

On the EM20 there are 4 Connections
M M1 M2 and D/G

if only running two antenna's which should I use?

Is there any benefit of running 3 ? or does it have to be 2 or 4?

Is there a command to see the signal strength of each antenna?

My old Sierra modem had a nice status comannd that showed that ...

Is there an AT command to choose the primary band for carrier aggregation ? When ever I put in an AT command for multiple bands it usually selects band 13 as the primary and aggregates with either band 4 or 66 ...the issue with this is the performance is way better when it’s on either band 66 or 4 ...

Trying to keep track of data usage on the router please any help is appreciated! It has goledOrb/ WiFiX firmware ...

Can't get a connection.
Apparently this mofi is not going to cut it. What equipment set up would you recommend going to?


What band is your phone using ? (use cell info lite app to determine) as long as it’s not band 66 you should be able to lock your mofi to that band also in the modem ...

Thank you so much !!

Is there an AT command for TTL settings for this modem or would that be something I set with the router ? I have a NEXQ6GO router ...any help is greatly appreciated !

Thank you !

I used the AT command to group bands 4 13 and 66 however the modem will only aggregate to 2 of the bands either 66 and 13 or 4 and 13 but not all 3

thank you!

I just put this setup together ...it’s working good (you must have a lot patience putting the pigtails on the modem!) drilled two holes in the front for the WiFi antennas if you don’t plan on using it for WiFi no need to drill any additional holes just put the LTE pigtails in the 2.4Ghz holes...does ...

Thank you for the reply! you are so right...it takes a lot of patience I had to put 4 on ...I got it done but there’s got to be an a easier way lol

This incredibly hard and frustrating please help with any suggestions on how to put these on ....