Wireless Joint

Did you check the filesystem & reboot the Pi? When I get unexpected problems that's my first step in trying to resolve.

System -> FIle System Check

You could try the Verizon firmware. Is it already loaded in your modem? I'm not certain it will have any effect though. Just to re-iterate: I haven't run any AT commands to make changes to the modem. I just set the correct APN via the web interface & rebooted. Generic firmware selected on the modem.

I think that, unfortunately, the WiFix firmware does not support modem firmware-flashing. I have ordered a Mini PCI-E to usb adapter with SIM slot. I think that I should try this firmware: 7.PNG Any thoughts or suggestions? Don't you already have the latest generic firmware already installed on ...

foolhardy wrote: ↑Sat May 30, 2020 10:10 am My apologies. I meant "Where did you get your firmware which you installed recently on your MC7455?"

The mofi web interface has an "internal module flasher" to update modem firmware. Presumably the firmware is downloaded from mofinetworks.com but I can't be 100% certain.

Good catch. What modem version are you running and where did you get it? Can I flash the firmware with it installed in the WE826GO-U? The current firmware came on the modem and I've not flashed firmware before. The modem was included in the MOFI4500-4GXeLTE-SIM4_COMBO that I purchased in January of ...

foolhardy wrote: ↑Sat May 30, 2020 9:50 am Good catch. Can I flash the firmware with it installed in the WE826GO-U? The current firmware came on the modem and I've not flashed firmware before.

I did recently flash the firmware via the mofi web interface but as I don't have a WE826GO-U can't make any recommendations.

I re-read the thread and noticed that your MC7455 has a different firmware to mine: 0:[AT!impref?] 1:[!IMPREF:] 2:[preferred fw version: 02.30.03.00] 3:[preferred carrier name: GENERIC] 4:[preferred config name: GENERIC_002.046_001] 5:[current fw version: 02.30.03.00] 6:[current carrier name ...

I tried this with my WeBoost a few weeks ago. I connected the cable that previously went from the amplifier to the internal antenna to the primary antenna port on my mofi and left the "paddle" antenna on the secondary mofi antenna port. Signal strength on the Mofi was at -60, (normally in high -90s ...

How do you now that the mofi has an MC7455? I previously had a 4500 and it would not work on visible either. My AT&T sim is currently in the MOFI, but here's a screenshot showing the modem (highlighted in yellow): https://i.imgur.com/aHdDhj3.png And the output of ATi3: https://i.imgur.com/yCw63Gi ...

Not sure the topic you speak of, but without the type of modem your info has no bearing. The topic in question is MC7455 & Visible. I just did not know what modem I had. I can confirm that my Mofi has an MC7455 and Visible works fine by selecting the correct APN from the drop down list and then ...

To bring my post back on topic, my mofi has a MC7455 (I think - it's not powered on currently so can't check). The visible sim works in that too just by changing the APN name.

gscheb wrote: ↑Fri May 29, 2020 9:05 pm What modem do you have?

Sierra EM7565

It's probably no help to you , but I just popped my Visible SIM into my USB enclosure, changed the connection profile in Rooter to VSBLINTERNET (previously broadband for my AT&T sim) and it just works. The USB enclosure is connected to a Raspberry Pi 3B+ running GoldenOrb_2020-03-01 ( OpenWrt 18.06 ...