Wireless Joint

has anyone gotten the bandwidth monitoring to actually work. I have it running on a mofi4500/WE826 and it is not working. The stock mofi firmware monitor did work but this one is a no go. Any suggestions?

Correct. After 4 hours working with Verizon it turns out the my Sim card went and got itself fubar in the verizon system. Had to get a new sim card and everything is working great on the GoldenOrb firmware

I did that. Got connected for about 15 minutes then died again. I have not idea what is going on with this thing.

2.24.05.06
Generic

Sorry I vanished. I reloaded the stock MOFI FW to get back up and running. I just put GOldenorb back on and am fighting to get connected again

So here we are again. Everything was running great until is wasn't. Verizon wireless is not open until 8am so I am checking to find out if I am missing something. It looks like my modem is trying to connect but can't for some reason. Starting to think im getting blacklisted because of the imei. When ...

OK. tried a few different band combos. Wife threatened me with death if I didn't stop tinkering while she was trying to work..... reset back to band 00 and not I got CA on Band 4 and 13... tweaked my Antennas a bit and I think I am ust going to walk away. Thank you for all the assistance. I really ...

Didneywhorl wrote: ↑Wed Apr 29, 2020 10:08 am Might want to try to create a band lock group that includes all ATT bands except 4, and maybe exclude 5 as well. Test it one exclusion at a time I guess.

My service is Verizon not ATT

https://wirelessjoint.com/viewtopic.php?t=364 Sierra Wireless modem band lock guide and spreadsheet. I did just that last night. Did a band lock on one band at a time and did some speed tests. . But I think I need to run it again with my new settings. I assume that there is no way to find out what ...

Right side of your previous output says Start a speedtest, then run an AT!GSTATUS? command while it is running, during the download portion of the test. Post that output. output during download AT!GSTATUS? !GSTATUS: Current Time: 3494 Temperature: 47 Reset Counter: 1 Mode: ONLINE System mode: LTE ...

The PCC is the Primary carrier (Band 13), and the SCC is the secondary carrier (Band 2) used for carrier aggregation. Your RSRQ signals in very poor. OK time for the ELI5 moment. I see the Band 13 but where did you pull the Band 2 from? I have 2 yagis in my attic aligned towards by best tower. One ...

Update. I full disengaged my head brom mu Butt.... now seeing 30ish downloads again. Still no CA though. any thoughts on that? AT!GSTATUS? !GSTATUS: Current Time: 537 Temperature: 50 Reset Counter: 1 Mode: ONLINE System mode: LTE PS state: Attached LTE band: B4 LTE bw: 20 MHz LTE Rx chan: 2150 LTE ...

Looks like you are on Band 5 with 10MHz of bandwidth. I also see no secondary carrier. I would first make sure the bands are set to all. Go the Modem > Misc > AT Command Terminal and run the following command: AT!BAND=00 Then, do a power off/power on reboot, and run your GSTATUS one more time ...

Didneywhorl wrote: ↑Wed Apr 29, 2020 8:44 am Are you testing speeds via the LAN cable, or wifi? Ive heard reports that openwrt firmware can make wifi performance less than some other firmware distros. I've never tested this.

Testing via Ethernet

I have had a Mofi4500 for some time. Was never truely happy with the stock FW. Found this site and learned of Goldenorb. I installed the WE826-GO2020-03-01 firmware and everything went well. But my speeds dropped from 40 down to around 12 down. Nothing else has changed with my setup. Just the ...