Wireless Joint

Update: I ended up using the regular version of OpenWRT and then added packages for QMI and Wireguard.

I thought I would post an update. I ended up getting a Sierra MC7455 modem and connected it to a Raspberry Pi with a USB adapter. I updated the modem to the latest generic firmware and sent the AT command to allow for IPV4V6. I couldn't get Wireguard to work with Rooter, so I installed openWRT on ...

I must be doing something wrong with the WE826GO-U router. I put the EP06-A modem in a USB adapter and plugged it into a windows 10 pc. I put VSBLINTERNET as the APN and IPv4v6 as the IP type and it connected and is working fine. I'm getting the same speeds as I see on my phone.

I still can't get visible to work with the EP06-A. I did try the AT command: at+cgdcont=1,"IPV4V6","VSBLINTERNET" to enable IPV4V6 and set the APN. I also changed the mode to MBIM. It will connect, but little or no data will transfer. The funny thing is that the visible SIM isn't working in my ...

Hi,

I just got a WE826GO-U and installed a Quectel EP06-A modem. I would like to get it to work with a Visible SIM card. I set the APN to VSBLINTERNET, but it will not connect. I tried an AT&T SIM with APN set to broadband and it works fine. I read the posts on using Visible with a Sierra modem ...

Did anyone get this working? I just ordered a WE826GO-U router and planned to run Wireguard on it. I assumed that is possible since GoldenOrb is based on OpenWRT 18.06.7. However, I have never used GoldenOrb, so this will be my first time using it.