Wireless Joint

@dairyman

I got 2.4GHz and 5GHz working on the WG1608/WG3526 running the OpenWRT 19.07 Snapshot with the help of LGA1150 on the OpenWRT forum. I installed the snapshot over the top of the WG1608-GO2020-06-14 firmware, but that wiped out the Modem section in the GUI. What was needed was to use the ...

I have more details on this, this only starts happening when you go over 50GB (prioritized data). Once it hits the deprioritized state, the connection just goes all to crap. You would think they would just slow the connection down and not just block packets all together.

I notice this happening every 3 hours also. I don't have connection monitor on so it doesn't restart anything to cause the whole connection to rebuild. Technically it's still online as the radio shows still connected, just the internet connection becomes unstable. Pings will drop out and come back ...

Thanks for the build i don't have the wifi issues anymore also that weird issue where i had to reboot the router when the modem like loosed the ip address anyhow i sometimes have this issue where the GUI loads very slow and some instability issues that sometimes my internet wired or wifi gets very ...

I have the ZBT WE826-T and I did the 19.07.2 update and now I am not seeing the LAN port lights when a device is plugged into one of the LAN ports. I tried the update from ChrisTork on this posting and still the same thing.

Anyone having this issue?

Any ideas what this can be?

Thanks!


I ...

Finally I got a chance to try the WG3526 version, unfortunately 2G WiFi is missing (light's off, no signal) and the modem doesn't get recognized either. Course I've tried reflashing it twice via the bootloader method plus regular, no dice. As soon as I flashed it with the WiFix version, everything ...

Hello, I am running the WE826-T. The previous fw GoldenOrb_2019-03-10 ( OpenWrt 18.06.1 ) has been very stable.

Where is the WiFix version that has worked for you?

Thanks!


I updated my initial post with a newly built version of 19.07.2 for the WE826-T2
I recommend loading this by doing the ...

Which firmware are you running the 826 or 3526? I haven't tried the 3526 to test it but 826 has been pretty stable for me, wifi hasn't dropped at all in weeks and the connection is always up with the default monitoring on.

Seems ok here. What browser are you using? I found IE to work the best on this version.

The wifi dropping out was a bug with the driver on the version of openwrt currently as the base for GO or others. In version 19.07.2 this was fixed. I posted an updated version of GO that has this updated version of openwrt. My wifi has been stable ever since and the speeds now match what the ...

It's based on the goldenorb 19.07.2 rooter build packages. https://www.ofmodemsandmen.com/buildpkg.html

Correct, No mods other than fixing the loop. I did set default ttl and settings etc. As I got tired of having to set them up everytime I flashed.

Give this a try for the WG3526.
admin is the default pass

Basically just modified the conmon.sh file located at /usr/lib/rooter/connect
Set the default track_ips="8.8.8.8" so it always has a value incase it gets cleared during the pings.

A few lines below that was this check
f [ -f "/tmp/connstat$CURRMODEM" ]; then <--- this would always be true, every ...

Thought I would just post this out there for people having issues with the WE826 WiFi always dropping out. Apparently in the openwrt versions < 19.07.2. There is a issue with the WiFi drivers that cause it to hang when high bandwidth devices are being used. This would require a hard reboot of the ...