Wireless Joint

Hi,
So my router is going slow and im only getting 10mbps and I don't know why.
I was wondering if someone can help me?
This is the status of the at!gstatus?

at!gstatus?
!GSTATUS:
Current Time: 834 Temperature: 43
Reset Counter: 1 Mode: ONLINE
System mode: LTE PS state: Attached
LTE band: B41 ...

Alright I'm going to have to see what i can do for the antenna if we can't use a splitter, but you have been a HUGE help! Thank you so much! We just have a ton of internet devices in our house and without internet it causes issues. I can pretty much say this topic is resolved! Thank you!

While your Main (RxM) antenna is getting good signal strength, your Diversity antenna (RxD) is poor (the RSRP is below poor).

The MC7455 modem has two antenna port (U.FL) connectors. One is labeled Main and the other AUX (for Diversity). I would check for lose connections and/or bad cables from ...

Go to Modem > Miscellaneous > AT-Command Terminal and fun the following commands:



at!entercnd="A710"
at!gstatus?


Notice on the right lower corner of the window, you can drag the box larger to see the read out. Take a snap shot, or copy and paste the returns of the commands.



at!entercnd ...

If you have no modem tab, then something as happened in the upload process. Upload a new image of GoldenOrb and make certain the save settings checkbox is unchecked. When completed, you should have the modem tab.

I would not use the configuration file to restore it since something was not right ...

I don’t even have the modem tab....


It sounds like you have restored the original OpenWRT software. It will not have the modem tab. Use the tutorial that Jim pointed you to before to "Download a fresh image of GoldenOrb".

When you get to the end of the tutorial, there is a link for the ...

If you have successfully restored the configuration, and you are running GoldenOrb, and just not able to connect, follow the TROUBLESHOOTING guide.


I don’t even have the modem tab, do you think you would be able to remotely connect to my computer and see what the issue is? I would connect my ...

How do you know it is not reading the SIM Card? It appears the firmware is not loading correctly.

For purposes of troubleshooting, it is helpful to detail the events and steps you have taken.


Ok so the configuration wasn’t wiped, I did step one and i was able to access the interface, after ...

These are the steps you will need to follow:

Download a fresh image of GoldenOrb per THIS tutorial.

Once downloaded and you will need to access the boot loader menu to reinstall GoldenOrb using THIS tutorial.

Then you will need to follow steps two and three in THIS tutorial.


Ok so i am ...

JimHelms wrote: Mon Jun 11, 2018 8:02 pm Did you happen to press the reset button?

I tried too but it wouldn’t reset

Hi,
For some reason I can’t access 192.168.1.1/cgi-bin/luci, I can’t access the router at all or get a internet connection, I can get to the redirect page from 192.168.1.1 but after that it says can not establish connection. Any idea what to do? And if there is no other option, how do I factory ...

Oh wait I found it, its Sierra Wireless, Incorporated MC7455

I don't know what information you need then, but at random means like at system startup, when something downloads, I don't really know what triggers it

Also the wifi is off on the device and a ethernet is pulled into a netgear nighthawk ac1000 modem broadcasting the wifi

ZBT-WE826
running GoldenOrb_2017-12-15 ( LEDE 17.01.4 r3560-79f57e422d ) / LuCI branch (git-17.290.79498-d3f0685)
Kernel Version 4.4.92

Hi I was wondering if someone can help me.
So we have a ZBT-WE826-T router with a sim card with sprint in it but its going a little weird. For some reason speedtest will say its getting 30mbps, but once you start downloading something it will go to speeds of like 1mbps (Downloads will go to like ...