Wireless Joint

Add me to the list of folks interested in the MHF-SW23 pigtails ...

and at+cpin? =

AT+CPIN?
+CPIN: READY

OK

@JimHelms Thanks for your help on this

Turns out this was an issue with my provider. They reset something related to my SIM and now I am connected and getting the following at!gstatus? at!gstatus? !GSTATUS: Current Time: 222 Temperature: 31 Reset Counter: 1 Mode: ONLINE System mode: LTE PS state: Attached LTE band: B2 LTE bw: 15 MHz LTE ...

Thanks !!! below is the result of AT!GSTATUS? The PS & EMM State seems weird ... at!gstatus? !GSTATUS: Current Time: 43869 Temperature: 28 Reset Counter: 2 Mode: ONLINE System mode: LTE PS state: Not attached LTE band: B2 LTE bw: 15 MHz LTE Rx chan: 1075 LTE Tx chan: 19075 LTE SSC1 state:NOT ...

Thanks - that did help !!! Got the firmware installed but now I am seeing my original issue - WAN1 (the modem) is showing disabled in the MWAN status page. The network interface is showing "Network device not present" but I am getting a "normal" looking response from the modem when I do a AT!GSTATUS ...

Hi, thanks for the quick reply - trying the Chrome plugin below, but getting a brick when flashing. Can reset to get back to Breed ... couple of questions 1) there are 2 M2M firmwares on the Google Drive 1 is label H721, the other is H721 (Quectel) any ideas which is correct ? https://drive.google ...

Hi, I had my M2M running great, but then something very weird happened, and it was dropping the modem interface - the modem was running but the interface was not connecting - after a ton of troubleshooting I decided to hard reset - bad idea... I am now at the Breed Web interface, and have downloaded ...

Hi, On my Ubiquiti USG, I had a static public IP for my fixed wireless connection, and was able to have my LTE connection as a 2 WAN, all worked fine, no issues. I moved over to an 826-t2, then to an M2M both with Golden Orb -openwrt-18.06 branch (git-18.210.69179-6df9a57) / GoldenOrb_2018-11-02 In ...