Wireless Joint

I went to the Facebook Wireless Joint page and was asked if the wifi LED light was blue or green. It was blue and broadcasting on the 5.0 Ghz frequency. I logged in to the router and changed the wifi broadcast frequency to 2.4 Ghz. Everything works now.

I was running PCLinuxOS but just installed Ubuntu on my laptop. Installing Ubuntu made no difference, my laptop isn't detecting the MBR1400 even though it detects other wifi networks in my surrounding area so it's not the fault of my laptop. I could try to connect to it as a hidden network but I don ...

I recently purchased a Cradlepoint MBR1400 router. It establishes a connection reliably and it's fast. Our iPads connect to it with no problem. None of our laptops detect it as an available wireless network. Fortunately our desktop PC is connected by an ethernet cable and it works fine. Another ...

I discovered the wind storm had nothing to do with me losing my connectivity. My wife's excessive data usage due to streaming videos all day got our unlimited tablet plan flagged by AT&T.

I'm back with AT&T again for now. The wife's not happy about having to deal with her blog addiciton but that's life. If she gets us canned again I may try Visible. Thanks for the tip!

Thanks for explaining the logic. I never thought of buying a junk tablet for the IMEI number but that's a clever option. My main objective when purchasing my LTE router was to dump my local cable company who kept raising the cost of their data only plan and provided lousy service. I was also ...

Having to buy a tablet nullifies one of the main purposes of buying an LTE router, to save money. I can type on a laptop keyboard much faster than on a touch screen so I have no reason to buy a tablet.

I can confirm that the AT&T stand alone tablet plans can be not only be throttled but cancelled. Back in mid March after a high wind storm I lost all connectivity with our WE826T router. After numerous attempts to reconnect and a couple of weeks went by I received this message from AT&T:

Dear ...

A friend of mine purchased a WE826T at the same time I did. We both had connection problems from the beginning. I upgraded my modem from a Sierra to a Quectel and it allowed me to stay connected for several months. He upgraded his modem and increased his power supply from the original 12v 2a to a ...

We experienced a high wind storm on 3/26 and lost our connection with AT&T. I've tried restarting the router numerous times since then without success. I turned off WiFi in the router using an Ethernet connection to my PC. Then I entered the system log and it looks like the system settings may have ...

We experienced a high wind storm on 3/26 and lost our connection with AT&T. I tried restarting numerous times since then without success. I turned off WiFi in the router using an Ethernet connection to my PC. I entered the system log and it looks like I may have inadvertently changed a crucial ...

Hi-

I've been using my WE826T for a couple of years and want to shut off the WiFi so I can connect only with an ethernet cable. Where do I find the switch to turn off the WiFi in Rooter?

I have the same unit & have had connection problems with it since new using the Sierra modem. You might be better off taking the unit to a place that repairs Mofi units & pay them to fix it or just buy a unit that's guaranteed to work.

A friend who studied networking in college walked me through the settings and we discovered the LAN ports are labeled or wired backwards. We figured out the ethernet cable needs to be plugged into number 2 or 3 for the WiFi to work and there were some other settings in the Network section of ROOter ...

Now that I have a consistent ethernet connection with the WE826, I shut off my cable modem and WiFi router then checked for a signal. It's not showing up on my other laptop in the list of available networks. Incidentally, the LED WiFi indicator on the WE826 isn't on.

I'm using the router and modem listed above to write this message so I'm making progress getting it to perform correctly. Yesterday I followed the directions outlined in the 'MC7455 and ROOter - Troubleshooting Connection Issues' thread and was able to get an ethernet connection established. I ...

Thank you for the ROOTer links. I do appreciate the help this forum provides and I know you're doing your best to get people connected. I was born way before PCs were in existence. I get a little bent out of shape because there were no computer courses when I was in high school so I usually end up ...

Should I refresh my WE826T-2 router? I tried changing wifi passwords but since there was no 'edit' button to select next to radio, I couldn't go any further. It appeared that 'radio' had not been enabled and there was no option to enable it so I assumed the wifi wasn't working. Later, when trying to ...

Yes, I read about the bug in the newer version also, that's why I used the GoldenOrb_2018-11-03 but ended up with the ROOter version which has caused nothing but headaches for me. I'm going to attempt to re-flash the modem with the OpenWRT version.

I also have GoldenOrb firmware, the 11/18 version and I'm trying to find or change the password of the wifi so my wife can login with her Ipad. She tried the password rooter 2017 and it didn't work. I went to NETWORK > WIRELESS, but the wifi radio only gave the options RESTART, SCAN and ADD. I don't ...

Fortunately I was able to use the reset button following the instructions to hold the button in for over 8 seconds and whatever password was on the router was erased. The 11/18 version of the GoldenOrb firmware had installed correctly. I'm now able to login to start configuring the router. Thank you ...

Thanks.

I did as instructed and left the password field blank:

Invalid username and/or password! Please try again.

Well, I just attempted to perform-

STEP TWO: FLASH THE WE826-T2 WITH GOLDENORB FIRMWARE

To flash the firmware follow THIS TUTORIAL.

Once completed, return to this post to configure GoldenOrb.

I entered 192.168.1 1 and Voila! The login page doesn't look anything like the login page displayed in ...

The user name and password on the bottom of the router are root and admin. Root is entered by default and won't let it be changed and the password field is empty.

So are you telling me that when I clicked 'flash' during the firmware upgrade process the first time, it didn't effectively flash the ...

This is my 2nd day trying to get my WE826-T2 router working. After many frustrating hours being walked through the flashing process by my tech saavy friend, I was able to get that accomplished. None of the web page images during the flashing process looked anything like those shown in the build ...