Wireless Joint

Didneywhorl wrote: ↑Fri Feb 23, 2024 1:13 pm Nvidia Now is a cloud gaming service right?

Yeah. And they run a network diagnostics before connecting.

All carriers seem to be doing an all out war on VPN use on cell data. It's odd as heck. Have you tested it ok outside of the VPN use, or tried a simpler proxy, or just used TCP only on the VPN? Gaming services and VPNs use UDP traffic heavily, and that is seemingly what is getting messed with. If I ...

Are you using SA 5G or LTE+NSA 5G? This may just be the poorly implemented ipv6 that Tmobile forces on SA 5G. It's "faster" but it breaks things constantly and usually is unstable for many people. (not everyone, just many) I'm using LTE+5g NSA Bands. It's actually AT&T but I posted here because the ...

I know this is an older thread but I'm having similar issues with 520n-gl +wg1608 wifi disabled, Ethernet to Asus RT-AX88U Merlin ATT post paid. I'm not convinced it's an issue exclusive to T-Mobile. If I do a persistent ping test, (I think it was on ping-test.net) network test with GeForce NOW, or ...

Alright I successfully flashed it by selecting Force upgrade. After a few mins everything came up with the new Goldenorb firmware installed.

I just got a WG1608 from China that came with a custom OpenWrt firmware. I want to flash GoldenOrb and downloaded the official version here https://www.ofmodemsandmen.com/download.html . I get an error about the uploaded image does not contain a supported format. I'm guessing this is just because ...

Something like PDAnet or tethering enabler for Magisk?

I'm trying to do the same thing with a Pixel 6 pro on AT&T and merlin on RT-AX88U. I have tried "Extend the TTL value" - Yes, with" Spoof LAN TTL" both yes and no. Both configurations still burn Hotspot data. I have IPV6 - disabled in the settings. Screenshot 2022-11-01 103337.png Screenshot 2022-11 ...

Mine has still been up, Going on over 4 days now. Maybe they were doing repairs or adding 5g to my area. Not sure, but this is a lot better. My speeds over the last 4 years have been steady dropping from a peak around 80 down to a low of maybe 5 down, before again coming back up to around 20-30 this ...

I almost hesitate to post this because I don't want to jinx myself but my connection has not disconnected from the internet for almost 6 days. As I previously posted a few days ago, I did a factory reset and firmware upgrade. I've not done any tweaks to the MOFI. APN is set to Broadband and ...

I called MoFi and talked to them about the problem a couple weeks back. They asked me to send an email and to download the system logs and send them along after a failure. Nothing but crickets since... I had also opened a ticket via the web interface and heard nothing from them. I also referenced ...

Thanks for letting us know about the firmware. I don't see anything in the changelog that indicates it will help, but worth a shot anyway. I sent Mofi a support ticket to see if they can shed any light on the issue. My disconnects are becoming increasingly more frequent as months go by. It started ...

This issue still persists for me. I've used Mofi and We826 Goldenorb/Wifix routers for about 4 years now. It wasn't until ATT started cracking down on the ipad plans this year that the random disconnects became an issue. Sometimes it will come back up within about a minute, other times and becoming ...

If they are unwilling to refund you , why couldn't you dispute the charge with your credit card company? You paid for a service they did not provide it. The cancellation emails they are sending out are not stating that their TOS has been violated. Just my 2 cents Yeah Im sure I could. I havent even ...

So how do I get a refund since they shut the data off several days before the renewal? I'm not worried about the previous month but there's no reason to spend $35 for a full month of non service.

How do we contact ATT over these prepaid plans anyway? I have a line that used 1131 GB and appears to have been shut down 5 days before the bill was due on the 12th. But they charged me again for a new month and have an email that says it was successfully renewed. The Sim card doesn't have data ...

Well simple mobile appears to be throttling me to unusable speeds now in my we826 w/ mc7455. Had been working fine since Mar 31. Strangely if I go through a VPN it's decently fast and actually usable. When I disconnect from the VPN it wont even load a webpage. I was hoping it was some sort of ...

Well I'm not sure what's going on with my Simple mobile line today. Has been working very well since March 31, 2020. But this afternoon it stopped playing youtube videos and pages were loading slow or not at all. The network in my we826 says "home" instead of T-mobile, and when I put it in a phone ...

I would also be interested in running a proxy through the router

Im using simple mobile with a we826+mc7455 and Wifix. I had some issues getting it to work at first. It worked in my phone and in my MOFI 4500 immediately but it took a long time for it to work in the We826, i'm not even entirely sure what finally solved it but it's been working fine since Mar 31 ...

I wondered if QMI or MBIM mode makes a difference here, I think the Mofi runs in QMI mode and not sure what a fresh install of Wifix uses, I dont know the difference between these modes, or if they are factors. Maybe someone with more knowledge can chime in if this tree is worth barking up.

I just activated a simple mobile line and tried it in my WE826 with MC7455, latest generic firmware. I changed the APN to simple and the TTL to 65, the modem and sim card are recognized but it doesnt connect to data. However my ATT line works fine in this modem with correct "broadband" APN. When I ...

I went through the list and didn't see this mentioned, although I haven't read all the pages. Has anyone tried a normal At&t unlimited phone line such as the At&t Unlimited extra and change the TTL settings? Does this work? EDIT: Read through all the pages, I have another question. Does anyone know ...

right clicked on "QD loader", clicked "Update", clicked "Browse my computer for driver software" clicked "Let me pick from a list of available drivers on my computer" clicked "USB Composite Device" that was showing in the list that showed up! clicked "Next" Yeah that's what I attempted with mine ...

How did you get USB composite device to display as an option?

At some point it's time throw in the towel, once too much time and effort has been wasted on a relatively inexpensive device which was clearly not meant for production. Not trying to disappoint, but during all this time trying, could have worked the same amount of hours at a regular job, and bought ...

Well I've tried as much as I'm willing at this point, unless someone has more information that could help. I created an Ubuntu drive and successfully flashed the firmware within linux. It still has the carrier miss-match. I'm not sure why, or how to resolve it, but something just isn't right here ...

So it seems like the firmwares all flash just fine, but they aren't being loaded. When I type AT!IMPREF="GENERIC" at!reset It changes the prefered firmware but under current firmware it is blank. So maybe they are corrupt, or maybe it's not compatible with them for some reason? Ill try switching ...

JimHelms wrote: ↑Fri Jan 31, 2020 7:33 pm not sure. why don't you flash all the carrier firmware and try it. they are available on the drive but I do not have access to them right now.

I'll try that. I previously downloaded them all

EDIT- Ok I installed all 4 twice. Will see what happens

I think the current carrier name needs to match the preferred carrier name. So they both need to say Generic

Carrier name and all that still say miss-match. Going to flash a new firmware and see what happens.

Carrier name missmatch 2020-01-31 183907.png

Well after looking at my cradlepoint modem, and comparing it to yours, I just mirrored yours. I might pull the one from my MOFI and see what it says and copy that. But for now it seems to have accepted it. ALthough the oem reset still isnt right, going to try some other stuff and see what happens ...

JimHelms wrote: ↑Fri Jan 31, 2020 6:44 pm You can try it....not much to loose at this point.

Is there a particular format it should be in?

Set PRI 2020-01-31 183907.png

So I found this PDF document... could I just give the modem a PID part number? Or is it looking for that to match something else?

JimHelms wrote: ↑Fri Jan 31, 2020 5:45 pm This is what it should show on restore to OEM:

Reset to OEM.png

Yeah mine just says 0 for all.

Will it now accept the restore to OEM command? Unfortunately not, each firmware I've flashed I try to OEM command and get the same result. It's odd, because it seems to actually flash the files, because it always reports whatever version I install. but the OEM command never works and it stays in ...

JimHelms wrote: ↑Fri Jan 31, 2020 5:39 pm Yes, that is not what the carrier PRI is supposed to look like. It should have a PRI Part number.

This is an example I just pulled on a Cradlepoint MC400LP6 (which I had handly) which uses a MC7455:

PRI Number.png

ohh interesting. Thanks for that. At the very least I'm learning something.

Hopefully, he can shed some light on which modem you have and can offer a swap. It is often more expensive when buying thru China in an attempt to save a few dollars. Yeah worst case I file a dispute. My first few I bought from china without issues, but yeah often in an attempt to save money we do ...

Is the circled what's causing the carrier miss-match? On the first line is shows 2.32.11_00_ATT_XXXX
and the line below is shows 02.20.03.00_00_GENERIC_XXXX

Funny, I was actually typing up a message asking if this might be an "engineering sample", which as you already found out is a pain to flash (or impossible). Some companies get these real cheap under the pretense of using it for engineering testing, yet they sell it to consumers at a high profit ...

I stumbled across this page and under modems it shows production vs engineering samples. https://github.com/danielewood/sierra-wireless-modems and this comment " I would recommend you get a production model. Engineering Samples will sometimes contain an early (SWI9X30C_00.08.02.00) firmware that can ...

I am not sure what is causing it. But there is something wrong or corrupt in its configuration. You might try flashing it with older GENERIC firmware (twice) and then try the newer one. Other than that, I do not have a clue how to repair it. You may have to contact whoever sold you the modem, and ...

SIM Card does not matter. You actually do not want a SIM Card in it as Windows will try to connect it to the internet and take control of the modem--which is ALWAYS a bad idea. You still suffer from mismatches and low power mode, which is most likely the result of the mismatch. So is this because ...

Also I dont know if it matters but during most of these tests I do not have a SIM card installed in the modem. Only when I move it over to the WE826 have I been putting the SIM in, as I only have one active sim and its my primary means of internet.

PRI missing 2020-01-31 135417.png

It seems like maybe its not loading the PRI file into the modem?

I flashed the generic twice and then ran the commands in Huawei with same result of LPM and nothing changed from OEM reset.

JimHelms wrote: ↑Fri Jan 31, 2020 1:42 pm Now try to flash with Generic and see what happens.

I guess it flashed?

Generic flash 2020-01-31 134950.png

It seems to be flashing the firmware.... Ive managed to switch to the ATT firmware from the generic. And I was quick enough to catch a screenshot of the flash before it closed the window. However it still says LPM and it shows that carrier miss-match name -Not sure what to think of that. ATT flash ...

JimHelms wrote: ↑Fri Jan 31, 2020 1:01 pmAs long as it is in low power mode, it will never connect.

You are going to have to get the modem to take a good flash, or return it and get another.

Alright, I'll keep trying for now. DOes this mean anything to you?

config missmatch 2020-01-31 130741.png

What does the AT!GSTATUS? show while it is trying to connect. Well ive moved it back into the computer to try and make headway, but I ran the command from Huawei and I get the following. AT!gstatus 2020-01-31 125120.png And here's what happens when I run the firmware update resetting adapter 2020 ...

I usually see this happen on updating the firmware when all the COM port drivers have not had time to load. Try unplugging the modem, and wait a few seconds and plug it back in. then, just forget about it for 10 minutes or so, then try flashing it again. Also, it never hurts to reload the Sierra ...

Unplug your modem. Plug it back in. Run the Sierra Wireless software for Windows again. Let it set for a few minutes to load all three COM ports. I finally just switched to a different computer and made more progress. This computer actually shows 7455 in device manager instead of generic mobile ...

Well the update seems like its not working either.

JimHelms wrote: ↑Thu Jan 30, 2020 4:41 pm Something is going on with your modem. It seems not to have restored, or deleted any configurations, and you have an Error.

Maybe your firmware update will fix it.

Yeah I was just looking at that and updating my above comment.

If you are going to run it as two commands, then it takes: at!entercnd="A710" AT!RMARESET=1 Ah, well I feel foolish then. Seems to have worked. I think? Do I need to be concerned with that "recieved: ERROR" or is that just because it needed the reset command sent? If all looks good I proceed with ...

Well I seem to have sort of made progress. I ran Huawei Terminal as Admin and was able to issue the following commands. ATI (it then sent me a bunch of information on the modem) at!entercnd="A710" (it said "OK") !RMARESET=1 (i've been sitting here for 3 mins waiting on a response.) Annotation 2020 ...

You will also need to first install the Sierra Wireless software drivers for Windows. When using the Huawei Terminal, connect to the WAN Modem port to issue AT Commands. I dont know whats going on. Both Huawei terminal and Putty are giving me issues. Huawei usually just freezes after i enter my ...

JimHelms wrote: ↑Thu Jan 30, 2020 3:35 pm You can use the Huawei Terminal.

I'm so sorry for all the hand holding you have to do lol. Which com do I connect to? https://imgur.com/a/3YZzZKN

Annotation 2020-01-30 154353.png

Run this AT Command: at!entercnd="A710";!RMARESET=1 Then, when it acknowledges the files have been restored/updated/deleted, issue the command to reboot the modem: AT!RESET I won't be able to issue these commands from the WE826 the first AT command always times out. I now have the modem connected ...

It is seeing the modem, so that is a good sign. I would reset the modem to OEM, and then flash the MC7455 with latest Generic firmware (GN2) and then flash it a second time. Thank you for the reply, how do I reset the modem to OEM? I will search in the meantime. I will use the files you linked.

So as a test I decided to pull apart my cradlepoint CBA 750 / mc400 modem. (uses a Sierra 7354) I installed the latest windows driver package (same driver package is used for both the 7354 and the 7455) and plugged it into the computer and everything is recognized / working. This same process should ...

I have a mofi sim 4 and have built two of the we826/mc7455 without issue. This is the 3rd one i've built and they dont seem to be playing nice. I ordered the router from The Wireless Haven and the modem from Aliexpress. My other builds I bought everything from Aliexpress. Anyway, it seems like the ...

Thanks Jim! That's exactly what I was looking for! Very much appreciate your reply

I have an older CBA750B Cradlepoint with an MC400 (MC7454) that I don't use anymore. I have a mofi SIM 4 and two WE826-T2's each with an mc7455. What can I do with the cradlepoint. Id kind of like to play around with it. Can the MC7454 be installed into a WE826? Or can the MC400 be used with the ...

Connection monitoring was never enabled. Signal seems ok. For the most part the disconnects aren't too bad, maybe once a day. But I have noticed a disconnect here and there more so than with my Mofi. AT!GSTATUS? !GSTATUS: Current Time: 292 Temperature: 49 Reset Counter: 27 Mode: ONLINE System mode ...

I just built the we826-T2 + mc7455 combination and installed GoldenOrb_2018-11-03 and AT&T with 2 amp power adapter. The router came from aliexpress with an OEM firmware installed, so I used the firmware recovery mode to flash goldenorb. I installed the modem before updating the firmware so I ran ...

Search found 66 matches