will try that. also would you be able to provide me a full firmware dump of the T10 itself? I'm unsure about how to go about obtaining it.


Ok for this one I will.
This is a full dump of the firmware broken down to individual partitions for you with the spare and sums removed already.
If you ...

Someone sent me this device to look at and since I just did the T9 I took a look at it.
It is basically just a t9 with a slightly bigger screen and a slightly diff board layout but almost the same
It is so similar I loaded t9 firmware to it and it runs fine with it.

You can see here my clone of t9 ...

Where can i get ahold of the t9 firmware you are using?

It is not a public file, I have not posted it anywhere.




have you tested it?


Not really, I made it for the T9 and have tested it on that device fairly well but did not do much if any testing
on the T10 besides loading it and ...

make a raw dump containing the spare and use that for the t10, as long as your nand registers and nand controllers are correct it will should load and run fine, however , be smart and first make a backup of the t10 in case it goes wrong so you can at least get back to a working device.

I had not planned on it, that would lead to about a thousand emails and msg's for support for all the people that mess their devices up fooling with it. cross flashing is very risky and I did not test this at all other than letting it run for a day, I have not even picked up a t10 since that day.

I gained my root access thru the adb port so I never needed the root pass so I never bothered to decrypt it, try frk9x07
that was it for the t9 and this one has the same chip so it may work. if it doesnt you can decrypt it by brute force use md5crypt to do it.

currently trying to get the root passwd using hashcat. hopefully it works.... (brute force using the length of the T9 password with the prefix frk)

Sadly this didn't work (tried several times with different approaches and none of them produced a correct password)
Would you be interested in taking a stab at it?

why dont you post it here and let the community try it, have you checked to verify it is md5crypt?

I am the owner of autoverifyme.com the original sms verification service, we used real USA numbers not virtual numbers, it became to difficult to get numbers for us so we took it down. we still have the tool though. virtual numbers would never work to verify most of the services our clients needed ...

autoverifyme worked for several years and besides my iphone tool it made more income than any tool I made, it had about a million lines of code, we used cdma phones and had about a thousand of them, the client would buy x amount of lines from us we used pageplus mostly but some vzw direct also ...

I had worked on getting a legit contract from Verizon for a year, we had the details ironed out and they were going to sign in a week we were going to be partners then all the sudden they did a 180 the next week they implemented into their system to only allow 3 MDN changes per cycle and told me ...

We could talk about it but as is it will not work now it is coded for use with a cdma network like vzw used to be, now having said that we did make a hack that allowed gsm lines to be programmed to cdma devices I am not sure if it still works its been like 3 years since I have tried it, you can msg ...

Update:
So I worked with this device some more over the last few days and can say t9 firmware does work fine and acts basically like any other t9 device, it gets service and as my build has all the hidden menus enabled and is pre-unlocked with the imei zerod out this all reflects on the t10 when the ...

Ok, I assume you only want the root file system, this is a 3 volume file containing, cache, usr and root filesystems, here is the rootfs part.
If you take it please hit the thank you button

You can use my firmware to load on it, it has comports already enabled including the android port which has full root access.

I did it via emergency mode and reload modified firmware to it with ports enabled. Otherwise you would need to have the correct url and password to do it like the t9, its been a long time since I fooled with it but I believe they are crypted now in the t10

look for testpoint on the board