Wireless Joint

What you really need to ask yourself is
do I really want to mount and AIM 4 seperate antennas?
or
get a single device that needs aiming?

if it aint broke dont fix it

I need to figure out if 4 white space antennas and b71+n71 aggregation is possible Or two whitespace antennas and a parabolic grid or ldpa mimo setup for b2+n71 is possible. Time to test with the WG1608, maybe install a few more pigtails to the trashcan. Noticed the whitespace antennas will pickup ...

Finally got a chance to test with the trashcan and the rm502q-ae. I am using whitespace yagi. that are 480-698mhz or so. Also I've tested with a parabolic grid and 1700-2600?mhz feed horn. I have observed B2+n71 CA. on the trashcan. Not the RM502Q-AE The trash can I installed sma pigtails to pin 3 ...

Easiest setup.... Router: https://thewirelesshaven.com/shop/routers/lte-routers/wg1608d-m-5g-ready-cellular-gigabit-router-with-dual-band-2-4ghz-5-8ghz-wifi/ (This is not the version everyone has issues with lately) Modem: https://thewirelesshaven.com/shop/modems/quectel-modems/quectel-rm502q-ae-5g ...

You will find RM500Q-AE antenna port mapping shows lower bands only available on ports 1 and 2. See my first couple posts in this thread for details. Also, see those posts for the possible ENDC combinations. The trick is the primary ports are 1 and 2 and they are also the lower band ports so both ...

Also be aware, 4x4 mimo is not currently possible on n71 with available modems. I may be wrong about SIM8200, though I think 2x2 is controlled at the tower anyways. The Snapdragon x55 definitley has whitepapers stating such. I suspect after I factor in b2 and b71 CA testing (only b2, b71, n71 look ...

For the WG1608, the firmware setup is the same as all the other WiFiX routers, WG3526-P, etc. Aside from the obvious router differences. for the 5G Clayx SIMs, I am currently working on a fix for this. IF you beat me to it let us all know. Here is the problem, that you can confirm with tests ...

Last week I moved from my trusty EdgeRouter X over to a mini PC (celeron + 6gb ram) running OpenWRT. Initially I found Mwan3, replicated my load balanced setup with edgeos and everything was running great. My aim was to run MPTCP, but only for one or two devices. Confused on exactly what software ...

WiFiX and GoldenOrb firmware by default assings and sends the APN as IPV4V6. There are occasions when an APN will requires an IPV4 address. This tutorial will modify the script to send the APN to an IPV4 address. There are two options provided for this modification: 1. Edit the c reate_connect.sh ...

Yes please that would help Immensely!

I managed to pay $165 for: Mini PC Intel Celeron J3455 6GB DDR4, 128 GB SATA SSD, Mini Desktop Computer, AWOW AK34 Micro PC, Windows 10, Quad Core, Dual Gigabit Ethernet NIC, Dual HDMI, 5X USB3.0, 4K UHD, Bluetooth Before hand running via edgeos I'd consider good, but it looks like now the amount of ...

Was able to request the EG18 modem AT Commands Manual from Quectel and put together the following Telnet commands that work with the LBR20: Enable Auto Band Setting: echo -ne "AT+QCFG=\"nwscanmode\",0,1\r\n" | microcom -X -t 1000 /dev/ttyUSB2 Enable Default Band Setting: echo -ne "AT+QCFG=\"band\",0 ...

They're not pointed perfect but.. I need a break.. Too much ladder and wrenches this past month. Haha

Thought I'd point this out here as it could be useful for some. Over the past week I lost CA and to make sure it was a tower issue I reset the modem etc. My Em7511 reverted to Verizon and I was not expecting it to connect, however it did! To T-mobile under a roaming profile. This was very strange as ...

Thats why i have been recommending ep06-a

no pigtail change needed and a really buget friendly choice.

Just my 2 cents

thewirelesshaven.com of course

*cough* We need a 600-900mhz 21dB+ 2x mimo feed horn *cough*

Thanks, I will try it out.

Yvess wrote: ↑Thu Mar 18, 2021 7:00 pm ZBT WG3526 Router with Quectel EM-20G CAT20 modem. Comes with a 4x4 MIMO antenna. Power supply and 4 WIFI antennas are included.

Asking $500

Free shipping lower 48 states.

Yves is this still available? if so, I'm interested.

(Sorry for posting again, just learned about the quote function)

I have 3 WG3526 routers with WiFiX GoldenOrb firmware installed. They are brand new besides being opened and upgrading the firmware. Included is the the router, power supply and antennas. I bought too many and don't have the time to install them so that's why I'm putting them up for sale. Asking ...

Went ahead and ordered the NEXR5GO with the Quectel EP06-A from The Wireless Haven . Maybe not the latest and greatest, but it seems to be a pretty common choice.

Only antenna's i've spaced too close together and had performance issues with were 470-690mhz whitespace antenna's, aiming for b71/n71. That is the lowest frequency we would ever go for as of now. Most offered LTE/Cellular antennas have horrible performance below 700mhz, due to pole spacing. Your ...

I seems I changed the password to log into my WG3526-P router and have lost the new password. This is my first build so go easy on me. Anyway to reset it or workaround?

Sometimes an alternative to modifying the imei is to use a VPN. It all depends on status of the connection to the tower. It might not be the answer for the average user, but it can be an option sometimes. I've seen it with both ATT and VZW where they block certain traffic rather than disconnecting ...

Hello, Set up Visible on Rooter several times. Use this below for custom rules and always worked just fine to get around the 5 Mbps. #start TTL rules iptables -t mangle -I POSTROUTING -o wwan0 -j TTL --ttl-set 64 iptables -t mangle -I PREROUTING -i wwan0 -j TTL --ttl-set 64 ip6tables -t mangle -A ...

Didneywhorl wrote: ↑Tue Jul 06, 2021 10:31 am Hey gscheb, have you tried removing the PREROUTING parts? I've found they don't hurt at all, but don't seem to be needed. Less to maintain, and simpler to understand.

No never tried it. Got this from the forum long time ago. It worked, so kept using it.

Hello all, When this plan started it was $50 per month. Then increased to $60 per month. That is when I got it at the $60 rate. Now a promotion at $50 again for limited time. Well I called them and asked to have mine lowered. They claim they did it and I will now be charged $50 per month now on ...

I had one disconnect Saturday night that required resetting the modem (MC7411). I am band locked to 66/71 and the weekend tourist traffic was really high so the tower was heavily loaded. Connect through a T-Mobile tower about 2 miles away. So still working for now on the West coast.

John

I am not familiar with that device but that usually means the apn is set to ip only you can try to run AT+CGDCONT? if your device excepts it you will see what its set to. ip=ipv4 or ipv4v6 is obviously both if it is set to ipv4v6 you are good there, most devices use pdp profile 1 or 3 for data so ...

Have had issues with mofi customer service. Basically string you along till you can't refund your credit card.
Even if they had the best products in the world still wouldn't mess with them. They are literally the worst company have ever dealt with.

Like an idiot, I did a pre-order with Mofi which I highly recommend against. Against my better wisdom, I decided to go the easy route and shotgun my purchase without researching. It is a one-man operation. Canadian Nice until you actually need them to act, after they get your money. So first, due to ...

@wherman 3G maxes out at about 3.3mbps so if you were getting 8mbps you were not using 3G. I believe that is a MediaTek device so there are not alot of PST'S out there for those type of devices. you should log in to t he devices admin panel, most are located at 192.168.1.1 or 192.168.0.1 if you ...

The We826 is a nice low cost unit. But that is the unit Mr-WorkingOnIt is having problems with. Would go with the WG3526-P 4G LTE WiFi PoE Router Dual Band (2.4GHz-5GHz) WiFi (ROWG3526-P) https://thewirelesshaven.com/shop/routers/lte-routers/wg3526-p Modem Sierra Wireless MC7411, CAT-7 LTE-Advanced ...

Fyi.

AT&T Announces Unlimited Elite Plan Upgrades: More Hotspot, Premium Data and 4K Video
https://youtu.be/mqZ1EaHX7aA

T-Mobile Mobile Internet 100GB for $50/mo Plan for Routers & Hotspots
https://youtu.be/Cy9jld_7lSk

ATT Post pay tablet plan will work with just APN change - but you risk termination as TOS requires SIM be used only in a tablet. Pretty much anything done using the methods in this thread and forum are ToS violations to lesser or greater degrees (depending on which lawyer you ask on a given day ...

Yeah, I was wrong / quoted the wrong numbers. On the tablet it does appear to round to about 25.

I don't know why their print out gave me those crazy numbers. Now that some billing has happened, I see that it is as it should be.

Update

I installed newer firmware in the router today.
openwrt-we826-T-GO2021-05-31 downloaded from the aturnofthenut Rooter repository.

On reboot from the install I have had both IPV4 and IPV6 connections!

John

There seems to be some funky stuff going on with the Tmobile network lately. For about a month now I've been noticing some random disconnects on both routers and phones (regardless if tethered or not). I've talked to several users around the country, and looks like it's happening just about ...

let me chime in about the external enclosure and mounting the router outside via POE. That is certainly one way to do it and if you on a tall pole one of the better ways, however, if your just going to mount antennas on your roof and your home is a one or 2 story you could also just run some high ...

Looks like you went NEXR5GO and MC7411. Remind me/us what exactly you purchased if anything else or different than above. I can guide you to the relevant info, or even help directly where there is a void of info. Thank you!! So far, just the NEXR5GO and MC7411 are on their way. We also have an ...

I know for a fact this can be done though I used an old phone that now sits in a drawer turned off. That said if your tablet will EVER go back on verizon network it will likely cause you lots oh potential headaches, having 2 active devices with the same imei is bad news. For a more :legal" solution ...

Used 2 amp for long time on mine for visible and TMobile. But had all kinds of issues staying connected to at&t. Finally started using a lesser device and it stays connected. A Netgear LB1120. Not saying anyone should get one of these. Just saying sometimes there is goofy stuff that might never make ...

mtl26637 wrote: ↑Sat Jul 17, 2021 9:15 am Surprised it doesn't happen more often. You know that got me thinkin, I think this may be the only forum I've ever visited in the past 20 years that doesn't have or need moderators. Just goes to show you what type of crowd we all are .

Mostly mature, educated, decent folks.

Didneywhorl wrote: ↑Fri Jul 16, 2021 9:25 pm Shameless plug. lol

Surprised it doesn't happen more often. You know that got me thinkin, I think this may be the only forum I've ever visited in the past 20 years that doesn't have or need moderators. Just goes to show you what type of crowd we all are

.

Would agree with Adm1jth, you will be up and running soon!! The only hard part of this game is spoofing your self onto the network with an older $20, iPad SIM. It can be done but sometimes it takes a little black magic. A weak signal can be a little of a challenge but can be solved with a good ...

Thanks for the responses. I'll work with it some more tonight.

Ok, Verizon was able to fix the way the data usage was displaying on my account. Now I can clearly see the breakdown: Data Usage: 23.4GB (sim in LBR20) 4G Hotspot Usage: 1.8GB (sim in iPad) So, for my Verizon Postpaid Tablet Plan, it appears that TTL of either 64 or 65 will mask the hotspot usage in ...

Hello all, This is my first post on Wireless Joint, please be gentle. ;) We've owned an externally mounted CPE which we purchased from China and we've had reasonably good luck with it (on AT&T) until this summer. This summer, the modem/router has decided that it really doesn't like heat. We are ...

IMG_20190928_154720429_HDR.jpg Should be good to go then. Put those antennas outside pointing toward desired tower plugged straight to modem. No booster. Fine to use booster for phones. Absolutely right, and honestly matches my setup 100%. I have 3 antennas. One dedicated to the booster which is ...

So the good news is that i reverted the firmware back on the USG to v4.4.52 and now the TTL adjustment works again... i guess i will have to keep an eye on that. Thanks for the assist!!

If you run into any trouble, I can mock up a duplicate of your system and send you a copy of the configuration file. Then all you need to do is make a few modem settings and you're done. Honestly, it's better if you try to set up yourself first so that you have the experience if and when you need ...

Make sure these antennas you are using are 50 ohm. Allot of booster antennas are 75 ohm.

I think I have enough info for my antenna install from another thread. Maybe can attempt this weekend.

Hi I use Calyx and have had no problems connecting through a T-Mobile tower. I have locked out the Sprint bands 25,26,41 on my modem to keep it from trying to connect to the weak low band Sprint tower that is 6 miles away. My local (1.6 miles) T-Mobile tower has bands 2,4,12,66,71. Now my modem is ...

just an aside when i was using visible i think i had to use the apn vsblinternet not visible but I am going from memory and I am old

In case this helps anyone in a similar situation... After talking with level 1 tech support and having them open a trouble ticket, they told me that level 2 tech support would take 24-48 hours before they would respond, so I kept the EM7565 turned on the entire week, with the EM7565 IMEI registered ...

I get about 50-60mbps / 1-4mbps on tmobile using the M1. I'm using 2 parabolic antennas and I'm about 90ft below the ridge I'm shooting over at a tower about 4 miles away. Yes it will work. There's no B71 though, if B71 is really good in your area you might want to consider a newer modem build that ...

The label on the bottom of the router shows the exact location for each antenna. crumbs how embarrassing! :oops: I swear I had a look there, but golly... aaaanyway, so, here's what it looks like: ....well apparently I need to upload photos to another website to share them here, but ahem this is ...

Honestly you are thinking about this wrong, you need to find what carrier works best in your area then buy/tweak equipment to match the carrier not the other way around. Also the GL-750v2 is a router, which modem is installed in it? Or were you planning to tether a phone to the router? If verizon ...

Didneywhorl wrote: ↑Sun Jul 25, 2021 6:41 pm If you don't have a SIM card inserted, sometimes that happens.

Sim will be here tomorrow. Will update when it arrives.

So, here it is. The sim card I got was voice,text only. I'm getting a new card that is on a data plan. $20 for 5 gigs a month. I could have just made the Sim I got a data plan, but kept it voice to work in old phone. It might take a week to get here, and I'll continue the adventure then.

After posting I dug around the net a bit and all of the logs I could find showed the same result. Seems when you are in 5G mode you will not see readings on the last 2. Switching to 4G mode and all show as normal. Not sure if this is a firmware/modem issue or if it is just the fact that these modems ...

Yes it was in MBIM Mode. I was able to get it online finally by adding the APN (VSBLINTERNET) to both settings, the connection profile and to the modem interface. Not sure if i was supposed to do that from the beginning but that worked. Also the TTL for Visible was 64 not 65, so I'm up and running ...

makes sense, thanks so much!

I went ahead and bought a visible phone plan, followed the instructions on your other post:
https://wirelessjoint.com/viewtopic.php?f=16&t=2212

and it works great! Now I just need to learn more about all this to try and optimize for best performance

Hey Cruiser, what did you end up doing here? I'm about to take the plunge into LTE modem/router world, this thread has been illuminating, since I'm thinking about a similar config. Hey prasta. I like my MoFi, but their service is nonexistent, and there are less expensive options that work just as ...

Visible speeds are all over the place. Seen 7-14 then literally 70-90 the next minute. Honestly for one person that might be enough speed to work. Do you plan on moving around in this thing or just sitting in one place? If you really need internet all the time with no interruption might consider ...

I would agree with Dr-Broadband you are likely on a different tower now as bands just dont change like that. As for commands I have a quectel modem so the commands and command syntax are completely different. So I am afraid i wont be much help in specific commands. As far as tower id you can get ...

OK thanks-no worry on the ping fix

Thanks, @Disneywhorl. I just sent an Email, much appreciated.

What did you do? I'm in this exact situation with my mbr1400 recognizing the visible Sim as Verizon.

I got mine working with a visible SIM tonight.

Update: After hours of troubleshooting, investigating, speaking to dozens of AT&T Reps. Advanced Tech Support, etc. the MoFi 5500 EM7690 does indeed register on AT&T's network as a Mobile Device (Phone), not a Data Only Device. If you use any kind of Data Plan it will not work. Nothing in AT&T's Pre ...

In Openwrt e.g. you can read with
https://github.com/koshev-msk/luci-app-smstools3
or
https://github.com/4IceG/luci-app-sms-tool

Thank you guys. My model is wifix we826go

Search found more than 1368 matches