Wireless Joint

Didneywhorl wrote: Wed Mar 25, 2020 8:09 pm Nice! The Telit LM960 is a great unit from what Ive seen, and I believe it does support 66 and 72, but not 100% sure. No time to earnestly look

"... I believe it does support 66 and 72" you mean bands 66 and 71

Hey, new member but long time cellular guy. So, with the issue isn't that your not getting the signal... It's that you sim isn't provisioned. That's the normal message that happens when an unactivated sim is fired up on T-Mobile. I was a long time user of OTR Mobile but with their shady business ...

When I log in to the Mofi control panel once things have gone down, and try to do the "Internet connection test" from the main screen it does indeed fail. However, when I go to System>>Diagnostics, and do things like run a ping test to openwrt.org or do a traceroute, they work and return live ...

Hi,

Another owner of MOFI4500 4GXeLTE SIM4COMBO is here.

The fact that you cannot get access to a webserver using HTTP _but at the same time you can use previously initialized TCP/IP connection tells us that most likely there is a problem with DNS (domain name resolution). This is when you can ...

So the SIM card is active.

Since it was working before you lost power, and it will no longer connect, I would first make sure the APN is entered and spelled correctly since resetting the firmware to its defaults would have erased it. And, SAVE & APPLY and hard reboot the router.

I am wondering ...

Problem solved: Location Services was on on kids computers. Everything is working now.

Sorry i've been gone for a bit.
Ive been learning more on all of this. I Just got my PI3 today and started playing with it. first time ive ever seen one. Thanks Didneywhorl for a lot of your help with this. i decided to go with a poe splitter instead of the poe hat. i read somewhere that someone had ...

When you run tbe command AT+GSN does it return the original imei or a modified number?

If its not the number your ATT account expects, then that is likely your issue.

We cannot discuss IMEI changes but I can tell you it may be good to backup any changes made to the modem to flash memory via the ...

Been there done that...
The problem is the T-mobile service I subscribed to. All of the problems I have had are based on the plan. Simply Unlimited Prepaid did not support my expectations. For a few $more everything is working with a postpaid plan.
I hope someone finds my mistakes helpful with ...

Appreciate the help.

worked great thx for the info

Look what i can do after a ip range scan looking for the Ku admin headers.

telnet 23
Connection success
[2J[;H[0;0HWelcome to MQWrt@WE826-T2 [192.168.1.1]
login:
admin
password:
admin

root:~#

I can now issue AT commands lol
--

.6mbps <=> My iPhone will pull 10mbps.

several things to note:

a) Generally speaking the LTE modem in you iPhone(assuming that we are talking about reasonably new version) is light years ahead of the modem installed in MOFI. But at such speed (10 mbps) it is hardly matters, MOFI modem is CAT ...

Hello,

first of all, please start from making a backup of your device. If something goes wrong then you can restore (most of the time with small exceptions) the configuration of your MOFI in 37 seconds.

*** EVERYTHING SHOULD START FROM MAKING A BACKUP **********

Another user has reported ...

BillA wrote: Sun Jun 28, 2020 9:37 pm Interesting info professor Terryjett, I will cuddle up with it tonight in bed and dive in.

More like Mr MaGoo but thanks for the boost in confidence

Here is a paper about the "Fresnel Zone and Cellular" I wrote up some time ago and just found it. Did a little refresh on it today. Originally compiled for a lecture I gave few years back. Maybe folks here will find the information useful.

Keep in mind that I am a country hick, so grammar is not my ...

Hello,
tried custom TTL?

Set TTL to 65 and turn off IVP6, that's what did it for me with that same setup

There is a facebook shop that is distributing for The Wireless Haven at https://www.facebook.com/netsolution.shop/shop/

I can help you if you don't like to use facebook.

Hi Didneywhorl. Long time lurker, first time poster. I wonder if you could help me with some equipment from The Wireless ...

The Chromebook has usb but I hate the Chromebook for the hardware and find the trackpad so non-useable I’ll be getting a MacBook like I’m used to. The Chromebook cane about because of the pandemic. My laptop was stolen. I was ordering a replacement in a few days. I find myself in a WalMart listening ...

Good idea, I'll have to try that.
Thanks.

If you don't wish to use a car power inverter (up-converting 12V to 110V then down-converting to 12V again is quite inefficient plus it could introduce some noise into the power line, depending on the quality of the inverter), you could plug the router ...

You can use the above speed test sites, though you'll have a pretty short amount of time for testing, so here's a direct link to iTunes download which should give you several minutes of a testing window for carrier aggregation.
https://www.apple.com/itunes/download/win64

looking into the end of the connector

Not all pictures have that angle but for those that do, the antenna side is male and the chassis is female.

Amazon will ship it to me tomorrow.

You've been busy :)

Yes, there's a HUGE amount of high quality information here.

I apologize for my 100 followups, I am really doing my best to take everything in and promise my followups will taper down over time as I understand things better.

Trying to find your tower isnt real hard, but ...

Didneywhorl wrote: Thu Nov 12, 2020 1:39 pm Take a picture at a different/slight angle if you could.

I have passed the request on to my friend she will give me more pictures at varying angles when she returns home from work today.

Thank you.

I will try. I found this too if it helps you

https://forums.quectel.com/t/lte-cell-p ... -ec25/3581

Hi Everybody,

Received the Sim card on Monday, installed it and everything went more or less well up until this morning. Internet is not working at all anymore. In a test, I have taken the SIM card our the router, put it in my phone and Internet was working. Put it back in the router, Internet ...

Thank You!

If anyone cares I just wanted to update my post. I got tired of messing with the settings and didn’t really want to reflash the router as I didn’t think that was the true problem; instead I decided to ditch the thermostat and start over. I read many reviews that a lot of the Honeywell thermostats ...

I am looking at a used CradlePoint IBR900 on ebay. My concern is that if the history on the device is not known, and it is currently tied to an active NetCloud subscription is it still possible to to a factory reset, and downgrade to a non-netcloud firmware. Or will the unit always try and re ...

A heat sink and fan will help keep it as close to the ambient temp as possible, but I'd expect it to still stay around 60c if your attic is baking at 53c all day. Could you just mount it to the ceiling and pop the cable down through one of those brush faceplates?

Mine is actually mounted right ...

Hell send me the needs and Ill quote you out a whole set with full specs.

Will do.

At the moment, we decided that by next week we will be handing out ~$10 (used) USB2 routers with GO loaded with bandwidth monitoring enabled on them to help us collect datapoints.

The assumption being made is ...

IP version can be set on both the modem and router, however they work independently.
The modem controls the IP version on the "air interface", between the modem and the mobile carrier.
The router controls the IP version on the local network only via the Network > Interfaces (must be set on all ...

I am sorry you had to go through this. Please report the listing as this is not right.

Bill thank you for confirming my suspicion. I hope more people find this thread and don't end up wasting their time (a critical resource) and money.

Mike, if you can please, order a Quectel (I recommend the EP06 ...

Why does my cell phone significantly outperform my MOFI (speed wise):
https://wirelessjoint.com/viewtopic.php?f=8&t=1457&p=9973#p9681

Why does my cell phone can download stuff just fine and my MOFI is extremely slow, - is the wireless network provider treating it differently?
https ...

AT! Commands for setup:

at!entercnd="A710" : Establishes admin access to Modem
at!usbcomp=1,1,1009 : sets MC7455 to MBIM mode, required for most interfaces (routers)
at+cgdcont=1,"IP","VSBLINTERNET" : sets APN as visble (seems that capitalization matters)
at+cgdcont=1,"IPV4V6","VSBLINTERNET ...

Update. After trying a few things out I decided to tryout the sim in my LB1120 and sure enough it came up 3G there as well. So after putting back in my Cricket sim and having it stuck in 3G. I was frustrated to say the least. However after deleting and redoing the APN the LB1120 with the Cricket ...

I did a full reset this afternoon and have been connected now for 8 hours .... longest in a while. We shall see how it goes.

Thanks! I have not picked them back up as frustrated with myself for screwing them up, lol.

Love to get your buddies advice on easy method to reset the Dell branded EM7455.

Got a few more coming over by slow boat from China so any advice is appreciated.

If you muster up some courage, you ...

The router will need roughly 60W-70W of available power for itself on poe. 72W POe injectors are what I use, the The Wireless Haven store on facebook has them.

The cat20 modem will FOR SURE work better, it will just be overkill for your router. A cat 6 modem is great, a cat 12, like the Quectel ...

The subject of getting a wireless data only connection at your home is a bit complex. First off does your cell phone provide you with a good data connection? You can find what the readings are usually in the settings area and under the system >About phone and than sim card status. Mine for instance ...

Actually, https://www.nirsoft.net/utils/ is the great place all together, highly recommended 8-)

I've been using many of Nirsoft's utilities over the years, one of my favorite is FastResolver, which lists all the IP assignments on your network... really useful for those elusive dynamic IP's ...

Interesting indeed.
a) open source - if one wants he can audit the code;
b) after installing Wincap driver it is possible to load balance two interfaces in the very simply way;
c) just look how easy is to manage different routes using the wizard - knowing how to manage the routes from command line I ...

I had two moFi routers fail to see the SIM card. Returned both, and purchased a couple we826 modems. Using the same SIM card as the MoFi's, and haven't had any problems since.

Thought I'd start a thread to discuss WISPs. I think a lot of folks that are technical and setting up 4G conections are probably learning about WISPs in the process. They are very common in rural areas now to solve the rural broadband problem.

Part of my adventure into 4G as a home internet ...

Whats worked lately with visible(verizon) and ATT is:
-Program the correct APN into the connection profile manager
-Remove all of the AT+CGDCONT entries, including AT+CGDCONT=1, via AT-Terminal window.
-Power cycle the router

Router will come up, program the correct APN and eventually connect ...

Got a confirmed solution. Mine is up and running.

Thanks to -LOM- over on the Whirlpool forum.

GoldenOrb does have a bug regarding it's Bandwidth Monitoring Service.

https://whrl.pl/Rf4NEk

There is because something changed in OpenWrt 18.06 from the earlier versions and a folder is not being ...

It's taken a few months and much assistance from BillA, but I'm happy to report that I've successfully gotten PagePlus working with my setup

https://i.imgur.com/2beoFmi.png

Ultimately I believe what solved my issue was following Yipzy's advice to disable autoselect config on SIM detection and ...

Do you guys have any trouble with the router overheating inside the enclosure during hot summer months ?

How did you get your Pi to recognize EasyTether USB mode? Downloaded it on my android, installed the package in raspbian, attempted restarting network services, doesnt recognize it. If I want to tether without easytether it picks it up automatically. Any help would be greatly appreciated!

Enter the AT command: at!gstatus? In the Modem> Miscellaneous area.

A Forum tutorial on finding connection issues discusses how to interpret what you see. It is at: https://wirelessjoint.com/viewtopic.php?f=21&t=14

This is excellent. Thank you! iptables approach is a good alternative—I can muck through it if I spend enough time researching what it is I’m trying to do due to lack of often/common use (my fault/problem, not iptables fault). It’s a bad excuse, but the one I am currently using. Thank you again.

I have the apple tablet with the T-mobile $20.00 plan. I also have the Netgear nighthawk m1 unlocked.
I was able to get the Tablet plan to work on my nighthawk without any problems so far. I just acquired a Mofi 4500 sim 4 from a friend and was going to use it as a modem for my amplifier mesh ...

Okay here's an update guys. The nighthawk x4 is gone. The coolpad is gone. I returned the netgear hotspot because they was sure of not letting anybody switch to an unauthorized sprint device so I been stuck with the coolpad even after the x4 broke down. I didn't realise that the nighthawk wasn't ...

1. I know Tmobile has the TTL approach to detecting tethering - does PagePlus or Verizon do similar things?
2. Is the LTE data quality between PagePlus and Visible the same or one is a bit better than the other?

PPC doesn't seem to care about a specific TTL, tested it from 10 to 255 and they ...

Got it sorted out.

Flashed generic firmware for the mc7455, and then switched to qmi and everything started to work again.

got it connected using another ATT sim, connected to 1 band but it's not CA'ing

got the AT commands manual from my vendor.

also contacted Honktavious MacGullicutty on the group, awaiting a reply

That is kind of what I thought but wanted to ask around.

How does the Golden Orb firmware compare to the Mofi firnware?

Also, any idea if there is a substantial gain from moving to the EM7565 over the MC7455 when used in the Mofi box running a different firmware?

I have your answer! I also ...

First surgery done on my WG3526. I replaced the EC25-AF with a EM12-G. Fairly straightforward. I was under the impression that the EM12-G had three antenna ports for 3x MIMO. This is not the case. It has Main, Div, and GNSS antenna ports. I drilled and added the third port anyway, as I bought the ...

As a side note (and a FYI), although there is no performance issue or lack of connectivity due to it, the modem active LED ("3G/4G") on the WG3526 is no longer functioning while using the EM12-G (located in a PCI-E to M2 adapter).

Testing has shown the LED is functional, and can be manually ...

...
I'm also toying with the idea of scrapping the RPi and associated software and instead use pfsense on a small x86 system....

pfsense is almost certainly out of the running. The only way FreeBSD (the OS under pfsense) supports LTE modems is via ppp. That limits performance to the 20mb/sec ...

The best bang for your buck would probably be a WG3526 router with a cat12 Sierra card inside (the pci-e one, so you don't need the M.2 adapter), the The Wireless Haven flat panel mimo antenna (15dbi), and enough lmr240 with proper connectors to hook it all up. That should come up to somewhere ...

I know that "cell boosters" are not a popular topic here but I wonder how well, or not, they really work.

Firstly, here's the new cellular connection for my RV that I put together last week.

rpi 10.18.01 PM.jpg

That's a Raspberry Pi 4 running Wireguard and EasyTether to an Android phone. I'm ...

Same here. Band 13 is strongest but band 4 is much better speeds (less congestion I guess). So trying to find antenna setup to maximize band 4 signal strength and quality. I have one parabolic and two log periodic antennas (I think all the same from John Barth’s video), trying out different ...

The Global Cell Id is hex. Convert the first 5 characters to decimal and that will equate to the eNB ID shown on cellmapper.

In your example, the eNB ID should be 176278. The Serving Cell ID decimal value in parens will equate to the PCI (possibly also in parens but not sure?) shown on the band ...

Take a look at [url=http://wirelessjoint.com/viewtopic.php?f=8&t=1403]my thread here[/url], and you can see what fixed it for me:

Didneywhorl wrote: Sun Nov 08, 2020 10:01 am FYI: thewirelesshaven.com is working on getting the special connectors/pigtails to allow adding pigtails for external antennas to the Tmobile home internet device.

Nice, hope you all can get them and at a decent price.

I set out on an adventure to dump my 3Mb/768k DSL in favor of LTE data. Little did I know the depth and breadth of the rabbit hole I was about to plunge into.

My first big break was finding @swwifty's thread in this forum on building his router. Inspired by his RPi 3 build, I decided to replicate ...

I know that this thread is a bit old, but I’ve done some simple tests using the internal antenna connectors.

I wasn’t happy with the drilling holes in the front strategy, so I modified the board a bit and soldered on a couple of U.FL connectors alongside the proprietary antenna connectors. Don’t ...

Problem solved thanks to FB Wireless Joint. Resolution: Change TTL to 117 -> Reboot -> Delete APN (leave it blank) -> Reboot -> Add back in APN -> Reboot = Connected. Strange but worked.

Then, relocate working router and spend 30 minutes trying to figure out that you have to repeat the process ...

Issue was resolved. Updating drivers and firmware via Windows must not have 'stuck'. After utilizing the following script I was able to obtain the factory IMEI and a connection.

I did have to rewrite a small portion(hardcode a variable) of the script as its outdated. I plan on creating a Windows ...

I think most of us are using 'phone' plans... Mine is an extra line on my postpaid unlimited phone account.

Altice is not a viable alternative for home internet unless you know for a fact that you will remain well below the 50GB data limit. Their T&C makes it very clear they DO NOT want you to use them for your home internet.

Thank you guys for all this. This information helped me get mine setup and working perfect.

If I follow these steps on my mac, what steps should I do differently? Thank you in advance!

Is there any way to bypass the Tmobile throttle using the current WE826-T2 "Intellligent Router" firmware. I will appreciate any advice
Tank you

As long as you're on an unlimited phone plan, set the ...

Search found more than 1369 matches