Wireless Joint

To put either modem in MBIM mode:
To put either modem in QMI mode:
After setting, reset the modem with:

This tutorial will demonstrate the process of flashing the firmware on the WE826-T router. The procedure is the same for other WE | WG LTE routers with the only difference is selecting the correct firmware for the router.

The WE|WG series of routers are loaded with OpenWRT firmware. Some users may ...

Sounds like you need an external antenna. With my mr1100 I routinely get around 50mbs down and 10+mbs up with 2 bars signal. Generally connecting to Band 66 and Band 2. My signal strength ain't all that great of shakes either.

My setup is the Mr1100 with no battery installed powered by an Anker ...

As some of you may know, or have recently found out, the newest Quectel modems (EM160, EM120, RM500, RM510, RM502) do NOT use all of the same AT commands as the predecessor modems.

Here are a list of a few new commands and what they should do, and a list of commands that I've found not working ...

Cool deal!