Wireless Joint

Sorry I didn't see that you are using your cell as a hotspot and the booster with the parabolic. Others have already posted that a "booster" does just that noise and all. In fact a booster can be worse than nothing at all because of this. Also a booster does not have the ability to use MIMO antenna ...

Only real way to minimize noise is with a MIMO antenna setup, which boosters do not support. All LTE routers require a SIM card in the modem. As I pointed out in one of my previous posts I was at the same point as you, nosey signal and poor booster performance. So I switched over to using a LTE ...

Thanks, I've looked around on ModemsAndMen but nothing really for answers. I've also looked around on OpenWRT which I used to know inside and out many years ago. I scaled back my testing to just getting ICMP (ping) to work from an external IP.

So I ended up using ngrok.com as the tunnel into my network behind the LTE.

I've got a stock Pi4 on the LAN side of my network with VNC enabled. Installed and setup ngrok to run on boot/reboot "./ngrok tcp 5900" And all is good for remote access of my LAN. I mostly needed it for configuring the 3 ...

Didneywhorl wrote: Tue Aug 10, 2021 5:20 pm Any way I can get you two write up a tutorial on this?

If so, that'd rock! Post it here: https://wirelessjoint.com/viewforum.php?f=21

Yes, I've got a bit more testing, once I'm happy with it and know it's works well I'll write it up

Hi all,

I've been using Visible for a while with my EM7565 setup, but lately I've been getting throttled to 5mbit pretty consistently. Couple that with high pings and significant streaming throttling and I'm looking for a new LTE option.

What's everyone using these days for a reliable, decently ...

Do you need 5g WiFi? Are you going to use your own WiFi home router or a mesh network? If you don't need 5g or are going to use your own home router/mesh then the NEXQ6GO The Wireless Haven works great.

Ivanesteva90 wrote: Sat Aug 21, 2021 8:55 pm Hi thanks yeah is enough for mi lte , but only a kit stable , which modem I can use? Thanks again ,

I've got an EM12 in both of my LTE routers, no issues.

The reason for this antenna array. 3 pairs of crossed polarized. Each pair going to a LTE router. This is 8 miles from the tower over two ridges heavily forested in the Cascade mountains .

Ivanesteva90 wrote: Sun Aug 22, 2021 4:21 am Thanks , wow do you have two LTE ROUTERS,

Actually I've got 3, two with the EM12 and the other with a EM7455. All connected to a TP-LINK ER605 router for load balancing.

I am interested in this. Is the free account capable of occasionally linking into to a remote LTE network to run (e.g.) RealVNC on a LTE attached Windows desktop, like OpenVPN provides? If the answer is yes, using RPi3 with GO as my main router, can it be added to the Pi3 or should I upgrade to a ...

Quectel Quectel EM12-G
IMEI: 8697XXXXXXXXXXX

This device is fully compatible with T-Mobile’s network technology.
This device is not blocked from use on our network.

For the EM12

AT+QRSRP
+QRSRP: -105,-107,-140,-140

First number is your primary antenna, the 2nd is your diversity antenna.

If you build this task, how do you know what to set the TTL to? Is there really a reliable pattern like "after one hour set it to 66, next hour 67 etc? I thought it was kind of random. Maybe you were going to try a selection of them and pick the best speed. That sounds challenging to say the least ...