Wireless Joint

I do. I just got the new 5G hotspot too, but I like to swap SIMs about all the time.

Kept focus on a B71 modem.

If you want a higher end modem, I can go there too

Easy low cost setup:

Router: https://thewirelesshaven.com/shop/routers/lte-routers/nexq6go-u-cellular-wifi-router/
Modem: https://thewirelesshaven.com/shop/modems/sierra-wireless-airprime-cards/sierra-wireless-mc7411-cat-7-lte-advanced-modem/

Better Router: https://thewirelesshaven.com/shop ...

I'm a heavy B71/N71 user here. I use a Quectel RM502Q. I'm in a rural area, and have it hooked up to boltons which are hard to align, but also tested it with yagi's and panels with similar results. I have it in a H71 router that I got on The Wireless Haven.

Its in 4 & 5G NSA mode, which means it's ...

Easiest setup....

Router: https://thewirelesshaven.com/shop/routers/lte-routers/wg1608d-m-5g-ready-cellular-gigabit-router-with-dual-band-2-4ghz-5-8ghz-wifi/ (This is not the version everyone has issues with lately)

Modem: https://thewirelesshaven.com/shop/modems/quectel-modems/quectel-rm502q-ae ...

2 boltons, 4 The Wireless Haven yagis tuned for B71.

FYI. The Wireless Haven will be stocking these parabolic grids very very soon. :)

As far as hiw many to use, I always recommend matched pairs (2 for 2x2 mimo modems, and 4 for 4x4 mimo modems) unless you understand your modem exactly and the nuances to unmatched antennas aa they pertain to your ...

Any idea how to band lock this router to 2 and 71? I can't find the commands


You will need to use the band calculator to determine the hex for locking the bands.
https://wirelessjoint.com/viewtopic.php?f=16&t=943

Example Command
echo -ne "AT+QCFG=\"band\",0,42000001003300385a\r\n ...

How do I delete everything including circle jerk mod and start with a fresh slate? I've tried nvram erase, factory reset, plus pin reset back of router and almost all the commands remain + netgear settings.


Circle_Jerk sits in a partition that doesn’t get wiped by a factory reset but factory ...

Circle_Jerk sits in a partition that doesn’t get wiped by a factory reset but factory reset does reset Circle settings which should keep it from running. Without SSH’ing in and manually removing the files and reverting to the factory files in the backup folder, you would probably have to flash ...