Wireless Joint

Thanks for the replies. A quick update.

I re-flashed router with this package:
http://www.aturnofthenut.com/upload/ZBT-WE826-19076-GO2021-03-06.zip

This is working well, UI is full speed. No disconnects from internet in last day, good speeds for my location. I think that band locking to the bands ...

Hello

I also have a similar problem. MC7455 with original firmware, WE-826-T2 running GO from 3/6/21. Using Calyx SIM to connect through T-Mobile tower. Always had just left modem in QMI mode that it came in, everything works fine for 14 hours then connection between modem and router dies. The ...

I had one disconnect Saturday night that required resetting the modem (MC7411). I am band locked to 66/71 and the weekend tourist traffic was really high so the tower was heavily loaded. Connect through a T-Mobile tower about 2 miles away. So still working for now on the West coast.

John

Update

I installed newer firmware in the router today.
openwrt-we826-T-GO2021-05-31 downloaded from the aturnofthenut Rooter repository.

On reboot from the install I have had both IPV4 and IPV6 connections!

John

Hi

I use Calyx and have had no problems connecting through a T-Mobile tower. I have locked out the Sprint bands 25,26,41 on my modem to keep it from trying to connect to the weak low band Sprint tower that is 6 miles away. My local (1.6 miles) T-Mobile tower has bands 2,4,12,66,71. Now my modem is ...

I have now managed to get OpenMPTCProuter working with Starlink and my LTE connection AND maintain domestic peace. At this time all of our current streaming and social media needs are being met.

To do this I had to use the latest snapshot builds of OpenMPTCProuter and the latest matching VPS script ...

I am using a V3 (rectangular) Starlink dish. I have always been behind the Starlink CGNAT wall, no public IP, IPV4 only.
I am using the the Starlink Ethernet Adapter.
I am running in bypass mode.
The Starlink is connected to the RPi using an USB3 to Ethernet dongle, TP-Link UE300, do not use the ...

I am glad the UE306 is working for you. I found that the longest the interface would stay up was about 2 days when using one. It required a full reboot of the router (RPi4) to reconnect. The UE300s have been running for four weeks now without a problem.

We don't have good internet service outside ...