Wireless Joint

Some specifics would be good like which generator are you using, lock, cnd or mep
AT!OPENLOCK="54D5E3060C0A72D5"
AT!OPENCND="54D5E3060C0A72D5"
AT!OPENMEP="C4F9A0E0A3FADDF0"

AT!OPENLOCK="9986D27C2F53443B"
With AT commands, you will either get an OK or ERROR, if you get OK then whatever you were doing
is completed, error of course means it did not work for whatever reason, you don't need to do any AT!RESET for
completed commands sent to work, OK means your device ...

I believe the MR5200 uses:
Can't help you much beyond that.

You should send your response back to it as soon as you get it and try not to wait, if you wait to return it to the device then just recalc the challenge first again and discard the first (the old) one.
you generated it correctly.

those 2 commands generate the same response but you still need to ...

AKosterin (who posted original ROMs @ https://4pda.to/forum/index.php?showtopic=778715&st=1720#entry126851144) says .53 is "research[]" only, and "not a stable build". Q to AKosterin - what makes this .53 unstable?


.53 is not stable firmware. It is firmware for Netgear testers with RA func ...

Two more minor nits/comments/questions re: your MANGLE process/terminal commands:

1. What is the directory where you choose to save your 'script.sh'? (You may be missing a 'cd' command at the beginning of your provided sequence of commands, unless you save it in the home directory)

[EDIT START ...