Wireless Joint

This is great info, sounds like we are experiencing the same issue. I will try to capture the info from my end to compare. Thanks!

Hey guys and gals,

A couple of weeks ago I decided to try a LTE home internet setup in order to ditch ViaSat (I live out in the boonies). I found a Verizon reseller who seemed fairly legit, and ordered a MoFi 4500 SIM7. I found a window to perch the MoFi where I can get 20+mbps @ 4am, and 6 mbps ...

You do bring up some good points many of which I had considered myself. I had also started with a mofi, a mofi sim4 as I knew right off I wanted to mess with carrier aggregation even though mofi support tried to convince me it really wasnt useful as most of their customers bandlocked to a single ...

Problem solved thanks to FB Wireless Joint. Resolution: Change TTL to 117 -> Reboot -> Delete APN (leave it blank) -> Reboot -> Add back in APN -> Reboot = Connected. Strange but worked.

Then, relocate working router and spend 30 minutes trying to figure out that you have to repeat the process ...

[quote=Actinidia_arguta post_id=13114 time=1602455881 user_id=3763]

I did find a copy of the EP06 AT command PDF, when searching for EC25 AT commands several days ago. I figured the basic commands were likely to be the same. Unfortunately my MoFi won't let me use the WebShell and SSH via PuTTY ...

Want to use the visible app to activate the service. Then follow this to set it up. Read this carefully. Shows how to do it on two different kind of modem types. But it works have done it several times if you follow it exactly.
https://wirelessjoint.com/viewtopic.php?f=16&t=2212

Sweet. I just signed up for visible. I just need a hold over until Starlink later this year. It's capped at 5mbps right? That's fine as I only really need web browsing and 480p streaming on 1 TV.
Thanks!

Paramount, Hulu, Netflix works just fine with streaming. Use VPN for Prime. Yes it is 5 up ...

What are your TTL settings? Is the VPN for Prime to get around the 480p cap, or to be able to use it at all?

Hello again

The TTL that works for Visible is 64. It is 65 if tethering a phone.

Also for good measure copy and past this shown below in to custom rules
Tab to the left of custom TTL ...