Wireless Joint

Thanks for the info!
I will check out those options. I went with the NEXR5GO router and an EP06 modem.

Would you look at that, there it is... Thank you.

@didneywhorl
Thank you very much, the additional doc adds clarity. I think I have enough understanding to start issuing AT commands... fingers crossed I have a working modem on the other side.

Thanks for the information!
I was moving from PagePlus to TMobile... It looks like everything got updated.

AT+QMBNCFG showed one active...

AT+QMBNCFG="List"
+QMBNCFG: "List",0,1,1,"ROW_Generic_3GPP_PTCRB_GCF",0x0801FE02,201910231


After the reboot
AT+CGDCONT?
+CGDCONT: 1,"IPV4V6","fast.t ...

Been connected for a few days now. It looks like my connection is solid. Thank you all for the help.

@BillA,
Thanks for the info! You mentioned auto-scan, that seems a lot easier than using the specific band commands. The spreadsheet came up with the following commands:

Band 2 = AT+QCFG="band",0,2
Band 4 = AT+QCFG="band",0,8
Band 5 = AT+QCFG="band",0,10
Band 13 = AT+QCFG="band",0,1000
Band 66 ...

Is there a list of all the AT commands needed to set up the EM12g? I am looking to set up a EM12 on PagePlus.
I looked at the spreadsheet posted above and decided quickly that I was in over my head. I do not want to brick the modem.

Aside from the full list of commands, which bands are required ...