Wireless Joint

A few questions: If you have a mofi that usually has the modem card internal why are you not using this configuration? Are you using goldenorb or the specific wifix version of goldenorb? what are you trying to acomplish with goldenorb that mofi firmware cant do as honestly for the little time I used ...

Do you see the modem listed in the Debug screen, towards the bottom of the page?

I'm not sure modem changes are supported in the mofi firmware.

I've never used the mofi firmware, but I'm sure its not much trouble to try it out. Your experience with upgrading the modem will really depend on your specific situation with cell band availability and signal levels. The modem itself is much more capable. Thats an upgrade from category 4 to ...

That is kind of what I thought but wanted to ask around. How does the Golden Orb firmware compare to the Mofi firnware? Also, any idea if there is a substantial gain from moving to the EM7565 over the MC7455 when used in the Mofi box running a different firmware? I have your answer! I also started ...

MaskToMyFace wrote: ↑Fri Jul 31, 2020 1:33 am I have your answer! I also started with the MOFI4500 SIM4 (MC7455)...

Do you think this would work with a SIM7 instead of a SIM4?

NDizzle wrote: ↑Wed Aug 05, 2020 10:48 pm Do you think this would work with a SIM7 instead of a SIM4?

Likely. Give it a try

eschmid2 wrote: ↑Thu Sep 03, 2020 10:47 am Does this new modem EM7565 require a power supply adaptor upgrade from what is provided with the MOFI4500? If so what is recommended? Thanks!

At least 2.5A but go with 3A if you will be buying one.

Does this new modem EM7565 require a power supply adaptor upgrade from what is provided with the MOFI4500? If so what is recommended? Thanks!

Thanks!

Don't know if you can fix it. The WE826-T2 router is famous for bad WiFi results. For years have been using secondary router like you are talking about. With 5ghz router connected to them been able to get about the same as Ethernet connection.

There is a WiFi power level setting on the MoFi, is it set to 100%??

Had the same issue when using a wg3526. Connected a secondary router via ethernet and let it do all the dhcp and wireless requests and like you I saw a big increase overall speeds. Since the secondary router only cost me $40 I honestly never looked back and am still running that config today. The ...

A dedicated wifi AP, like the ubiquiti UAP-AC-LITE-US, only uses max 20W during full load. Might not be as cheap, but the wifi throughput is top notch.

I use dedicated access points for my wifi. WAY simpler, and no dual router NAT to turn off and deal with.

A dedicated wifi AP, like the ubiquiti UAP-AC-LITE-US, only uses max 20W during full load. Might not be as cheap, but the wifi throughput is top notch. I use dedicated access points for my wifi. WAY simpler, and no dual router NAT to turn off and deal with. That works too. I think mine is 18w based ...