Search found 6 matches
- Fri Apr 03, 2020 2:06 pm
- Jump to forum
- Jump to topic
WE826 with MC7455 updated firmware / wifi fixed
Thought I would just post this out there for people having issues with the WE826 WiFi always dropping out. Apparently in the openwrt versions < 19.07.2. There is a issue with the WiFi drivers that cause it to hang when high bandwidth devices are being used. This would require a hard reboot of the ...
- Fri Apr 03, 2020 6:03 pm
- Jump to forum
- Jump to topic
Re: WE826 with MC7455 updated firmware
Basically just modified the conmon.sh file located at /usr/lib/rooter/connect
Set the default track_ips="8.8.8.8" so it always has a value incase it gets cleared during the pings.
A few lines below that was this check
f [ -f "/tmp/connstat$CURRMODEM" ]; then <--- this would always be true, every ...
Set the default track_ips="8.8.8.8" so it always has a value incase it gets cleared during the pings.
A few lines below that was this check
f [ -f "/tmp/connstat$CURRMODEM" ]; then <--- this would always be true, every ...
- Fri Apr 03, 2020 7:17 pm
- Jump to forum
- Jump to topic
Re: WE826 with MC7455 updated firmware
Give this a try for the WG3526.
admin is the default pass
admin is the default pass
- Fri Apr 03, 2020 9:32 pm
- Jump to forum
- Jump to topic
Re: WE826 with MC7455 updated firmware
It's based on the goldenorb 19.07.2 rooter build packages. https://www.ofmodemsandmen.com/buildpkg.html
Correct, No mods other than fixing the loop. I did set default ttl and settings etc. As I got tired of having to set them up everytime I flashed.
Correct, No mods other than fixing the loop. I did set default ttl and settings etc. As I got tired of having to set them up everytime I flashed.
- Fri Apr 10, 2020 9:45 pm
- Jump to forum
- Jump to topic
Re: WiFi Dropping on WE826-T2 w/ Sierra Wireless MC7455
The wifi dropping out was a bug with the driver on the version of openwrt currently as the base for GO or others. In version 19.07.2 this was fixed. I posted an updated version of GO that has this updated version of openwrt. My wifi has been stable ever since and the speeds now match what the ...
- Fri Sep 11, 2020 5:09 pm
- Jump to forum
- Jump to topic
Re: WG1608/WG3526 2.4GHz and 5GHz WiFi Working with 19.07 Snapshot
@dairyman
I got 2.4GHz and 5GHz working on the WG1608/WG3526 running the OpenWRT 19.07 Snapshot with the help of LGA1150 on the OpenWRT forum. I installed the snapshot over the top of the WG1608-GO2020-06-14 firmware, but that wiped out the Modem section in the GUI. What was needed was to use the ...