Wireless Joint

Postpay TMobile has a options to have HD streaming included.
T-Mobile are the only ones I know of that offer a unlimited HD streaming.

If you are over 55 years of age can get the 55+ plan.
Step 1 Get one line of 55+ magenta for $50
Step 2 then Add-ons for the "plus up data" which add 20 gigs of ...

Might want to read about things on this post here concerning PagePlus
https://wirelessjoint.com/viewtopic.php?f=32&t=1041

@PagePlus: You can try the EMEI on their website and see if it will work.

I believe the device has to either be from them or from Verizon (PagePlus said Authorized Verizon Device). For some reason i couldn't get their website to work properly unless i loaded it with Edge browser (got console errors ...

Working now.

Even after having the profile installed it wouldn't work. Kept asking me to login to verizon. I flipped on the hotspot mode on the ipad, and data started working. Flipped it off, I still have LTE data. Seems to have worked through a restart. I'm not sure if it was a timing thing, or ...

I had a power outage this weekend, when the power came back, my EM06-a would not connect to verizon.



A power outage may have corrupted the modem's NVM (Non-Volatile-Memory).
I would reset it and try both QMI and MBIM modes.

QMI mode
Copy and paste each command one at a time, and make sure ...

Looks like when it doesn't connect(2nd reboot after factory reset), it never passes the APN to the modem.



On the initial startup (which you define as a good start up) we see the default APN of "ims" set in profile slot 1.

+CGDCONT: 1,"IPV4V6","ims","0.0.0.0.0.0.0.0.0.0.0.0.0.0.0.0",0,0,0,0 ...

This is a tutorial for installing and configuring the Sierra Wireless MC7354 in the WE826 with GoldenOrb (aka, R00ter). It pertains ONLY to the MC7354 or MC7355.

As of this writing, the latest GoldenOrb (12-15-2017) by default, does not have the MC7354/MC7355 VID/PID included within its scripts ...

For those who want to modify the ROOter files can do so with an appropriate text editor like Notepad++

Note that the below is based on the current files in the 12-15-2017 GoldenOrb/ROOter build for the WE826. Since the files are forever changing with improvements, the structure and code may differ ...

It would depend on which version of the MC7355 you have. If it is OEM MC7355 there should not be an issue with adding its PID/VID using the method outlined above.

I have never cross-flashed a MC7355 with MC7354 firmware, and not sure why you would require it.

Digging in my notes I found reference ...

Whats worked lately with visible(verizon) and ATT is:
-Program the correct APN into the connection profile manager
-Remove all of the AT+CGDCONT entries, including AT+CGDCONT=1, via AT-Terminal window.
-Power cycle the router

Router will come up, program the correct APN and eventually connect ...