Wireless Joint

There is a build of the WiFiX firmware that apparently has a login option where you can get the signal stats updated in near realtime instead of having to run the command manually in the misc modem screen. I think this would help you greatly in aiming the antennas. If you have a hand held signal ...

HA! So you don't *know* which tower the 166 Mbps came from. :lol: That is damn fast, and at such a distance. But it does make me think of searching for Walter in On Golden Pond: https://www.youtube.com/watch?v=j_h8C_rCbgU You know he's out there somewhere now! :lol:

Your uploads are suffering with ...

FYI the EM7565 has a firmware bug that shows the main signal stats on B66 to be weaker than they really are. I noticed that in a couple of your screenshots. It's not an actual problem.

Thanks. I'm getting very consistent speeds with the current setup. I'll average 50-60dl/25-30up during congestion times and when it's not congested it'll give me the faster band 2 that pulls 100-130dl/35-40up. It's operating in QMI since that's how it came. You think switching to MBIM would help ...

Need4Speed wrote: Wed Aug 21, 2019 6:09 pm As soon as I switched over to grab screen shot of signal stats it switched right back to b66.

That Walter is a slippery fish!

Damn good speeds when you can catch him though!

Very nice setup! Thanks for sharing.

B2(15mhz) with b66(10mhz)on 2nd and 3rd CA is what gives me the really high speed. Seems it only gives me this cell in mid afternoon or early morning when the network is not congested. When it switches cells on me it's just b66 alone. Speeds average 70/25 on just b66. I might play around with the ...

Hi Need4Speed, Looks like a nice install. You can normally use a parabolic antenna almost edge to edge. However this one I suggest 12" edge to edge. The reflector grid is actually undersized at the lower bands 600 to around 900 Mhz. The wavelengths there are large and the feed horns might start ...